R/C Tech Forums - JConcepts Thread

I ran the Finnisher body with the 3.1 and no fan. I never bothered to try it with the fan but I'd expect it to either touch or be so close that it'd choke off the fan.

I ran it with a 7.5 and a 17.5, never had any heat issues even down here in FL.

Thanks for that information I have a 3.1 on the way I got theFinnisher also:spidey:

KAWIDAD

11-12-2013 04:44 PM

I bought a set of Bar Codes in blue(soft) compound. My old set of soft compounds where "gold". Are the new "blues" the same as the old "golds"?

Jake S

11-12-2013 04:55 PM

Quote:

Originally Posted by KAWIDAD (Post 12719556)

I bought a set of Bar Codes in blue(soft) compound. My old set of soft compounds where "gold". Are the new "blues" the same as the old "golds"?

blue = dirt soft, gold = clay soft.

PW	11-13-2013 06:15 AM

Quote:

Originally Posted by Cridd (Post 12719386)

What is the temperature point for reference to think about going from green to black?

That's a good question, but I don't have an exact answer as it still varies track to track and scale to scale. If the track is hard packed with no loose fluff; I would think anything in the 60's and below would benefit from the next softer compound.

Quote:

I bought a set of Bar Codes in blue(soft) compound. My old set of soft compounds where "gold". Are the new "blues" the same as the old "golds"?

They are in 2 completely different families (different rubber); Gold is primarily used indoor on smooth, damp, cool/cold clay surfaces. Blue is primarily run on dry, grooved, med/high-bite conditions indoor or outdoor.

mxnickj

11-14-2013 10:55 AM

Quote:

Originally Posted by PW (Post 12714322)

The Mugen is being worked on now ;)

Any idea of a possible time frame?

PW	11-14-2013 11:30 AM

Quote:

Originally Posted by mxnickj (Post 12724985)

Any idea of a possible time frame?

2-3 weeks

Hoese37

11-14-2013 12:16 PM

Anything new for SC trucks coming?

PW	11-14-2013 12:37 PM

Quote:

Originally Posted by Hoese37 (Post 12725163)

Anything new for SC trucks coming?

Not really; however we just released the black compound (mega soft) for SCT :sneaky:.

chrisjohns

11-14-2013 01:07 PM

How about bodies for the rt6? Rear and mid

PW	11-14-2013 01:18 PM

Quote:

Originally Posted by chrisjohns (Post 12725272)

How about bodies for the rt6? Rear and mid

The Finnisher for the T4.2 (#0252) works perfect and we will offer a mid-motor Finnisher the first of the year.

mxnickj

11-14-2013 03:01 PM

Quote:

Originally Posted by PW (Post 12725060)

2-3 weeks

Perfect!! I'll be ordering one as well as one of the Nissan Titan SCT bodies!!

travymoto11

11-14-2013 04:18 PM

Quote:

Originally Posted by KAWIDAD (Post 12719556)

I bought a set of Bar Codes in blue(soft) compound. My old set of soft compounds where "gold". Are the new "blues" the same as the old "golds"?

A few months back, I personally purchased three pair of "blue" 2wd barcode front tires and they were actually Golds. The feel and smell of gold vs blue is a dead giveaway. It wasnt a big deal for me because i have a track to use the golds at. You may have got one of the "batches" I got?

B4TravSC10

11-17-2013 07:55 PM

Silly question. Does the JC body for the 22 fit mid-motor

Medicinal Coma

11-17-2013 09:41 PM

Quote:

Originally Posted by travymoto11 (Post 12725799)

Same thing happen to me.........

ntJeff

11-17-2013 10:13 PM

Are the JC C4.2 rear bulkheads going to be cheaper than the $50 ae ones?

All times are GMT -7. It is currently 12:06 PM.