JConcepts Thread
#6211
The rear is ok its just the front that won't stay in camber at all its a mess
#6216
Had a good day at SCRC on Saturday. would like to thank Paul for all the help and information that he gave me on the front end of my buggy was very informative very nice guy was very helpful to me and others at the track on Saturday also got some good information and help from RUffy at the track overall it was a good day and thanks again guys for the info..Jerry.
#6218
Here is a track where they work really well - Click Here
#6220
Tech Master
Any eta on the new ball cups?
#6224
Tech Master
iTrader: (26)
They seem to be really good on indoor damp/slick groove conditions. We have also run them with great success on blue groove conditions with a little dust on the surface.
Here is a track where they work really well - Click Here
Here is a track where they work really well - Click Here
Sunday was different. No track prep all day meant it was dusty for every round. I ran PP's in both stock buggy and truck for A1 and worked, however buggy I was faster with scrubbed green V1 Bar Codes due to the dust. Truck however I was able to stick with the same rear green PP's and just switched to scrubbed front green Bar Codes from the green PP's. This calmed the steering down some and let the truck be more neutral off on corner entry.
In dusty grooved conditions the PP is a very good tire, but given the small pin they wear quickly in the same conditions. With the dust on Sunday the Bar Code was faster than the PP. Several team drivers were playing with Gold compound as well with good results.
#6225
Tech Elite
iTrader: (110)
Any info on the medium roller bag? Found it listed on tower but pictures or dimensions would be good. thanks
http://www3.towerhobbies.com/cgi-bin...?&I=LXDSCB&P=7
http://www3.towerhobbies.com/cgi-bin...?&I=LXDSCB&P=7