The racing was excellent, the weather was perfect, the track got better as the day went on, the REVO's dominated again, Team REVO 1st and 2nd. First place in Truggy, Buggy and Monster Truck went to MORRCC members, with a former Team REVO member moving into Truggy and dominated all day. Big thanks to Mark from Massive Mods for the GO engines and HB444 fuel and to Glenn for hosting another great day.


Congrats Joe and Team Revo ! awesome win ! and Castlemaine is agreat track too ! loved it there !

Cheers MM

Gday Mark, Just finished putting 3 litres through the GO 21 5 port and OMFG, people that have seen it have said its the fastest truggy they've seen. It idles perfect, runs perfect, what can I say. I've been using HB444 fuel and it rocks. Cant wait to start racing it.

Joe

love my new 3 port racing it`s only 3 tanks and i already know it`s one of the the better one`s,im very impressed with quality of the finish on the crank,sleeve and port work,but im a bit puzzled with the extremely tight fit of the removal of the piston and rod:weird:.i coupled it with the ttr 2035 for even more bottom end to get up enough power to hit our massive modded;) jumps we have up here at the valley raceway:Dand i am very confident of going into a 4 day race this week with this donk (thinking of buying another one with that new go pipe cant think of the number rite now:o)anyway every one give the new go 3 pt racing a go you wont turn back:nod:

AWESOMMMME !! Wait till you hit the 5 litre mark ! it will go even harder !

Thanks for the Props bro !

MnM :batman:

Hey Pitdog !

Glad to hear you are liking the engine ! If you have any questions dont hesitate !

Cheers MM

www.massivemods.com

ah!just one mark im a bit scared to get the piston out but i cant see any other way is there a trick to getting the piston out :weird:the sleave came straight out and with the crank at tdc i still couldn`t get the rod of the crank:cry:can you help please mark

Well it is a very tight fit . What you can do is run about a litre through the engine to loosten it a little . Or you can get a cable tie around the rod and pull the front of the crank while turning it gently .. Mind you if you dont know how you can damage the bushing .. Is there any reason why you want to take the engine apart ?

i like to inspect and polish every litre or so thanks for the advise mark pity you didnt get up for our state titles:)

Would have loved to but am wayyyy too busy .. one day ill make it up there !

just thought i should put something about the QLD titles had a pretty good weekend G.O engines top qulified truggy, pitty i had a bit of trouble with the car in the finals and finnished 8th, in buggy ended up 5th over all, using the 5 port in bothe buggy and truugy the engines ran well all weekend and bye far had enough power in bothe cars. had a lot of questions from others regarding the engines and couldnt believe how well they went a big thanks to massive mods and r/c hobby zone, a possitive weekend.

Hi all,

does anyone know the price of the top of the line .21 Go Tech engine?

Cheers
MBR52:cool::)

Massive Mods, Sydney
http://www.massivemods.com.au/index....b6c25f8abcc80b

RC Hobby Zone
Unit 9 14 Drury TCE Clovelly Park Adelaide
PH 08 8277 7 015
Ask for Darren
www.rchobbyzone.com.au

Thanx for that 2cool. I will be sure to have a good look at them for when I get my new car.

Congratulations to Go Engine/ MassiveMods /RC Hobby Zone team driver Craig Laughton for his excellent efforts in QLD State tiles at Sunshine !

Against some of Australias best came 8th + TQ A Main Truggy and 5th A MAin Buggy ! some unfortunate mishaps cost him a higher place but thats racing ! very pleased with his results !

Craig was using the GEN 5 Go 21 5 port and HB 444 fuel !

On ya Craig !

Cheers

MassiveMods Australia

www.massivemods.com

Sorry to spoil the party but Axe Rossi .25 actually TQed and finished 1st and 2nd in Truggy at the 08 Qld Champs...:)