dumper

iTrader: (1)

There are over 80 bodies on the list......pretty sure you can find something you like.

NutDriver

iTrader: (30)

+1

Micro_Racer

Outstanding! thanks....

NutDriver

iTrader: (30)

TQRC Racing now has the CRC wheels and tires in stock.

johnnywhopper

and they have a good video of a rubber tire car going around the track.

ammdrew

iTrader: (25)

Some Drivers starting to shake out WGTR's
https://www.youtube.com/watch?v=-Jpa1VP1Qu8

heretic

Wait, so you mean for just 200 bucks sans shipping you very simply converted your WGT into a WGT-R? Awesome! Now that sounds like something I want to do!

CBear3

iTrader: (3)

Some guys like to go all out. I'm a cheap SOB.
Option 1: Buy F1 pod plates
Option 2: Use washers/shims.
Option 3: Buy another lower pod plate and cut everything from the forward bulkhead screws off.

NutDriver

iTrader: (30)

ammdrew,

That's on rubber tires, not foam? 1s 17.5?

Airwave

iTrader: (1)

ammdrew

iTrader: (25)

Yes that is World GTR rubber tire's 17.5 and the one 1/12 is a pro-lite(21.5 spec foam 1/12)
If you want a speed referance here is a sedan run on the same track
http://youtu.be/RYT-k5Ti6dY

liljohn1064

iTrader: (17)

That is exactly what I did. But, have run it with 3mm shims and it was still great. The conversion leaves the motor at it's lowest point, but that's just me.

xps800doo

iTrader: (7)

are there 2 different classes? gt(goam tires) and gt-r(rubber)

is it still 1s/17.5 for foams?

all these posts are talking about rubber tires, but crc has foams on their website for world gt?

Grumpybrat

iTrader: (22)

Yes one is foam Wgt, however a lot of people are going over to rubber Wgt-R. Rubber is running 17.5 1s. Plans are to run two 17.5 1s rubber VTA body's and 13.5 1s newer style body's
Foam 13.5 1s wedge bodys

xps800doo

iTrader: (7)

so the rubber class in a 200mm and if foams its a 235mm width still?

are you able to convert older 235mm pan cars to the 200mm width? or are you pretty much forced to buy a current chassie designed to be run at 200mm?