skypilot

iTrader: (14)

I dont know how cheap, but mike wants to sell his (my old mi3 with exotic chassis) call FW.

loriding69

iTrader: (25)

Thanks

loriding69

iTrader: (25)

I wanted cheap. At his price, i can add another 100 or so and get a new MI4 just about......LOL

skypilot

iTrader: (14)

Wasn't that price that for a complete rtr car.

I have a lp with a SP 21.5 for 200.00 but I think your looking for cheaper. sold

Btw, found a couple of used mi3 chassis bottom plates if you want them

loriding69

iTrader: (25)

Thanks for the hook up. I can always count on you to come thru.

skypilot

iTrader: (14)

ran the "martin" steering servo setup today, awesome feel. I ran two cars back to back to back all day, my xray, very planted, very stable, very smooth, very fast, my Mi4cx, very on edge, very precise, goes where your thinking you want it, tighter cornering, more corner speed. very happy. I now have a choice of cars depending on traction and conditions, best of both worlds.

Benzaah

iTrader: (24)

Set up sheet please

gdcopbdcop

+1, ritchie, did you have to change it very much?

Rich

skypilot

iTrader: (14)

Rich, same setup as when you returned it. only the servo mounting change.

OVA

iTrader: (86)

Yep both of your car was looking pretty good ritchie..good job...

Racer X

iTrader: (2)

Thanks to GoodCop's urging and Skypilot loaning his CX to GoodCop, I'm back! Got my car on Friday and will be heading to the track next weekend. So much for racing retirement...

but I STILL hate ramping ESC's!

6Venom

iTrader: (44)

Ran a search but couldn't find anything.

I noticed a groove in all of the arms (front and rear) that appears to be caused by the wheels. I guess they are compressing under load but it looks like someone took a dremel and started cutting the arms. If this keeps up, they're going to snap. I also imagine it's really slowing down corner speed.

Has anyone run into this? Why is this happening and what's a fix? I run on asphalt with medium flex arms, neg 2 camber all around, RP36's or CS27's for rubber.

Thanks for the help!

NiMo

Never heard of this, and we have a number of Mi4's at our club.

Can you supply a photo or two please

6Venom

iTrader: (44)

Here are a couple of the rear. You can see the cut into both the front and rear side of the arm. The fronts have the same cut but only on the front side. Thanks again.

GSM Storm

iTrader: (114)

We used to get the mark on the front side of the rear arms running stock, with a soft setup, not getting now with mod, heaver oil now, you could try raising the inside of the arms, as you are running the alloy hinge pin blocks.

Regards
Gary