Originally Posted by FST4RD

With reagards to people using low profile servos and lying them on their backs to have the steering arms flat, I did something that cost me nothing and works almost as well.
I mounted my servo upside down and turned the servo saver the other way as well. I had to file the back of the servo so the wires go straight out the back. Result: arms sitting much flatter now and the steering looks better. Haven't taken it out for a spin as it's raining here at the moment.
I'll put up some pics later though.

Originally Posted by theatriks

newbie question on pit tires .....on tqrcracing site it shows 4 pit tires on the screen but im guessing only 2 come per pack is this correct?

Originally Posted by theatriks

newbie question on pit tires .....on tqrcracing site it shows 4 pit tires on the screen but im guessing only 2 come per pack is this correct?

Originally Posted by FST4RD

Here are the photos, taken from my phone so not the best. I think if you can't afford to buy a low profile servo and lye if flat, this would be the next best thing.

Only real mod is to take the back off the servo, file a small piece out so you can move the wires round to the back.

Originally Posted by Csaari77

Does anyone have some recommendations on 21.5 motors? I'll be using a SP cirtix spec speedo. I'm looking at the Revtech, D3, Thunder Power, or Ballistic. I'll be using it on a smaller carpet track.

Originally Posted by Csaari77

Does anyone have some recommendations on 21.5 motors? I'll be using a SP cirtix spec speedo. I'm looking at the Revtech, D3, Thunder Power, or Ballistic. I'll be using it on a smaller carpet track.

Originally Posted by mkennedy

ive been running a Thunder Power 21.5. great motor!

Originally Posted by Little John

+1 on the thunder power great motor!

Originally Posted by Csaari77

What's a good place to start on gearing and timing with the TP?

Originally Posted by rave1010hk