Hot Bodies Cyclone
#1201
Originally Posted by Kingcrab
yes! looks much better than black cap.
Is it a pro4 option, if yes do you have the # number???
Thanks in advance.
#1203
Tech Fanatic
The chassis on that car is the black carbon one with recessed cell slots not cut straight through it.
#1205
Damn Kingcrab where do i get some purple screws i saw it on that car and a page back also i am still waiting on my bulkheads but they have send them out yesterday and as soon it's arrive i can finish the car and race it i can't wait to see it perform on are dutch tracks, we soon see if the upperbulkheads really break that fast.
greetings hollowman
greetings hollowman
#1206
Tech Champion
iTrader: (9)
what's the largest spur gear I can put into this car....?
so assembly is going well.
chassis is prepped and CA'd.
rear diff went together nicely ... used 2 bearings instead of the spacer/bearing/spacer as per manual.
front one-way diff gear was a little tight... had to enlarge the hole just a hair.
also note that in the manual it states that the locked center pulley on the left side of the car...it is suppose to be on the right side and the one-way center pulley on the left... there was no addendum sheet with my manual.. on Japan website there is a photo of it.
so assembly is going well.
chassis is prepped and CA'd.
rear diff went together nicely ... used 2 bearings instead of the spacer/bearing/spacer as per manual.
front one-way diff gear was a little tight... had to enlarge the hole just a hair.
also note that in the manual it states that the locked center pulley on the left side of the car...it is suppose to be on the right side and the one-way center pulley on the left... there was no addendum sheet with my manual.. on Japan website there is a photo of it.
#1207
48dp is 80,and 107 in 64dp
#1208
New pics with the electronics installed:
#1209
have you ran it yet?
#1210
Tech Addict
Originally Posted by s2
48dp is 80,and 107 in 64dp
#1211
hara used a 108t spur with a 29t pinion for rubber class at vegas
#1212
how about for foam
#1213
Tech Addict
Originally Posted by S-T-R-l-K-E-R
hara used a 108t spur with a 29t pinion for rubber class at vegas
made sure hara use 107-108 spur gear in cyclone now !
he b4 use 107T in reedy race of asia
#1215