Hot Bodies Cyclone
#2703
Tech Champion
iTrader: (9)
Originally Posted by wyd
Anyone have purple aluminum steering knuckles Pm me if you would like to sell them. I'm in the hunt for some Square ones but Jet or HPI would be cool to. I found rear hubs no problem at Speedtech but the steering ones won't be in for a few more weeks.
stay away from the Square steering knuckles...I had a set and broke after a small tap on the wall...
the Jet version is more durable. or stay with the stock graphite ones..
if you're looking for jet try RcModel or Precision RC in HK.
#2704
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Originally Posted by rc-zombies
stay away from the Square steering knuckles...I had a set and broke after a small tap on the wall...
the Jet version is more durable. or stay with the stock graphite ones..
if you're looking for jet try RcModel or Precision RC in HK.
the Jet version is more durable. or stay with the stock graphite ones..
if you're looking for jet try RcModel or Precision RC in HK.
#2705
Tech Apprentice
I had all the 'bling' parts on my Pro 4 and I have to say the only parts that I have put on my cyclone are Aluminium Rear Hubs, Aluminium Front C-Hubs and the Carbon Bumber Brace.
When using the rear hubs everything runs smoother and when using the Front hubs you get less slop (not that ther is much!).
However the small gains from these are offset by the gain in weight. However I think it is worth it with the car being so under weight anyway!
The Knuckle Arms are just not worth it though. There is more weight for your servo to turn. The square versions bend really easily and the Jet ones dont fir the bearings very well.
So in my opinion if you want bling go for the Hubs and forget the Knuckle arms!
When using the rear hubs everything runs smoother and when using the Front hubs you get less slop (not that ther is much!).
However the small gains from these are offset by the gain in weight. However I think it is worth it with the car being so under weight anyway!
The Knuckle Arms are just not worth it though. There is more weight for your servo to turn. The square versions bend really easily and the Jet ones dont fir the bearings very well.
So in my opinion if you want bling go for the Hubs and forget the Knuckle arms!
#2706
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Well I will try the rear hubs at this time and my new steel bones and go from their.
#2707
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Originally Posted by tc3 racer sc
u never post ursetup
#2708
Failry sure the toe angle section on the front is meant for the outboard toe angle rather than the block your running on the front, unless your running 2.5 degrees of outboard toe in or out
#2709
Tech Master
iTrader: (1)
Originally Posted by Phil C
Failry sure the toe angle section on the front is meant for the outboard toe angle rather than the block your running on the front, unless your running 2.5 degrees of outboard toe in or out
#2710
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
I'm running the kit 2.5 front block and no additional toe out. Just the stock 2.5 for the front arms.
#2711
Tech Addict
Originally Posted by FUK_WRX
Terence any news on that new cyclone you got? any more in stock etc... pics anything? im really keen on this one want it before the weekend what are the possibilities
new Cyclone instock !
Leo
#2713
whats new about the cyclone is there different part or is it the same car , or just new to you
#2714
Tech Addict
Originally Posted by flysti
are you sure about this? cause their is nothing on your website indicating that you have the new updated version of the cyclone.
could you provide a link to it.
thankyou
could you provide a link to it.
thankyou
same b4 parts no. & barcode
#2715
Tech Fanatic
Originally Posted by HKRCMODEL
Sorry i'm not terence !
new Cyclone instock !
Leo
new Cyclone instock !
Leo