NEW XRAY T2
#1921
Sway Bar
I would like to know if anyone is running a swaybar on the front of the car. Since X-Ray didn't release them yet...I wanted to know what I need to do to run one.
What size is the ball cup on the front arm?
Is it necessary to run a front bar on this car on Carpet?
Thanks!
What size is the ball cup on the front arm?
Is it necessary to run a front bar on this car on Carpet?
Thanks!
Last edited by Twin 1 Kevin; 01-17-2006 at 09:02 PM.
#1923
Tech Regular
Originally Posted by Twin 1 Kevin
I would like to know if anyone is running a swaybar on the front of the car. Since X-Ray didn't release them yet...I wanted to know what I need to do to run one.
Is it necessary to run a front bar on this car on Carpet?
Thanks!
Is it necessary to run a front bar on this car on Carpet?
Thanks!
Some of the guys here in Dallas are using the 05 rear sway bar and it is working out great. You do not need it though.
#1925
Also if your local hobby shop sales airplanes you can get piano wire from there in 1.2mm or whatever size you want and then get some threaded rod while you are there.
Then use the long shock ends that were on the shock parts tree to thread onto the threaded rod.
Then bend the Piano wire to fit...
Look at some pics from the Novak race there are sway bars on them cars
You will get the idea.
Then use the long shock ends that were on the shock parts tree to thread onto the threaded rod.
Then bend the Piano wire to fit...
Look at some pics from the Novak race there are sway bars on them cars
You will get the idea.
#1926
Tech Champion
iTrader: (107)
Ran the car tonite in stock at Socal...Wow, what steering. We run high bite asphalt, rubber tires...I am very impressed with the kit. Did find out , I will need to run the tamiya wheel hubs, cuz the stock rims hit the shocks ...Oh well.
Ps. You may need to shrink wrap the cvd pins, I had a hard time keeping them in even with locktite. I may grind a flat spot to have the set screw hold better.
Kevin
Ps. You may need to shrink wrap the cvd pins, I had a hard time keeping them in even with locktite. I may grind a flat spot to have the set screw hold better.
Kevin
#1927
Anyone....
know if the new battery brace will be out soon? I'm in need of a brace bad.
#1928
Here are some pics of my ride.
It was the neatest I could do to get the GTB to fit. Not much space, but it all will fit just fine.
#1929
Originally Posted by RCknight
know if the new battery brace will be out soon? I'm in need of a brace bad.
#1930
Tech Initiate
Originally Posted by Frank McKinney
People have posted that the FK'05 brace will work if you flip it 180 degrees.
#1931
Here's my T2 with brushless sistem on it..
Last edited by Giuseppe d.; 01-18-2006 at 06:52 AM.
#1932
Originally Posted by James
I'd be interested to see how people are mounting their transponders (when mounting them on/in the bumper) particularly where your putting the wiring, etc.
could i cut a small section out of my foam bumper and have the transponder under the plastic bumper 'down brace' thingo.. ? pics also appreciated.
could i cut a small section out of my foam bumper and have the transponder under the plastic bumper 'down brace' thingo.. ? pics also appreciated.
#1933
Originally Posted by Miu Miu
Exactly....
#1934
Tech Initiate
Originally Posted by VenomWorldOrder
that's if you can get your hands on a fk05 strap. i think they are on back order with the motor guards
#1935
Tech Adept
iTrader: (5)
Originally Posted by Rob Phillips
DW, where did you get that 85* counter sink from? Can't find one locally. Can you bring it to the track Sat? Thanks