3LikesTamiya TRF415
04-06-2007, 03:35 PM
It'll have enough flex with the 2mm chassis. I personally don't like much flexi cars, I had to use the 4mm chassis to get my car to work on carpet 
04-07-2007, 04:09 AM
trf415msxx product manual
hi, can somebody please post a link or a pdf copy of the msxx product manual. thanks
04-07-2007, 04:43 AM
Originally Posted by Rnold
hi, can somebody please post a link or a pdf copy of the msxx product manual. thanks
04-07-2007, 06:22 AM
Thanks Ed
Originally Posted by TryHard
Almost, but not quite. The bumper mounting is different for the MSXX, as it uses the bumper from the Evo4/5.
@secretsg; Yes the MRE does have the Ti coated hinge pins, along with the ti coated shock shafts.
HiH
Ed
@secretsg; Yes the MRE does have the Ti coated hinge pins, along with the ti coated shock shafts.
HiH
Ed
04-07-2007, 06:28 AM
Originally Posted by TryHard
Almost, but not quite. The bumper mounting is different for the MSXX, as it uses the bumper from the Evo4/5.
@secretsg; Yes the MRE does have the Ti coated hinge pins, along with the ti coated shock shafts.
HiH
Ed
@secretsg; Yes the MRE does have the Ti coated hinge pins, along with the ti coated shock shafts.
HiH
Ed
The MSX and MRE use the 414/415 Front Bumper
the MSXX uses the Evo5 Bumper?
And both chassis (MSXX and MRE) are drilled to take both the new Evo 5 Steering and the older 415 steering?)
04-07-2007, 07:47 AM
nexxus:
The MSXX only has the holes drilled for the posts of the new steering system. I picked up the MRE edition because of this so it has both options for steering available to me.
The MSXX only has the holes drilled for the posts of the new steering system. I picked up the MRE edition because of this so it has both options for steering available to me.
04-07-2007, 09:54 AM
Originally Posted by nexxus
Just to confirm....
The MSX and MRE use the 414/415 Front Bumper
the MSXX uses the Evo5 Bumper?
And both chassis (MSXX and MRE) are drilled to take both the new Evo 5 Steering and the older 415 steering?)
The MSX and MRE use the 414/415 Front Bumper
the MSXX uses the Evo5 Bumper?
And both chassis (MSXX and MRE) are drilled to take both the new Evo 5 Steering and the older 415 steering?)
Originally Posted by 190mph
nexxus:
The MSXX only has the holes drilled for the posts of the new steering system. I picked up the MRE edition because of this so it has both options for steering available to me.
The MSXX only has the holes drilled for the posts of the new steering system. I picked up the MRE edition because of this so it has both options for steering available to me.
The extra holes you may see towards the sides of the lower deck are for the stiffning posts.
MSXX Lower deck
MRE Lower deck
Hope this helps.
04-07-2007, 11:55 AM
Originally Posted by nexxus
Just to confirm....
The MSX and MRE use the 414/415 Front Bumper
the MSXX uses the Evo5 Bumper?
And both chassis (MSXX and MRE) are drilled to take both the new Evo 5 Steering and the older 415 steering?)
The MSX and MRE use the 414/415 Front Bumper
the MSXX uses the Evo5 Bumper?
And both chassis (MSXX and MRE) are drilled to take both the new Evo 5 Steering and the older 415 steering?)
04-07-2007, 02:38 PM
Originally Posted by nexxus
Just to confirm....
The MSX and MRE use the 414/415 Front Bumper
The MSX and MRE use the 414/415 Front Bumper
Originally Posted by nexxus
the MSXX uses the Evo5 Bumper?
Originally Posted by nexxus
And both chassis (MSXX and MRE) are drilled to take both the new Evo 5 Steering and the older 415 steering?)
MSXX - No (new steering only)
04-07-2007, 04:36 PM
Is there a chart to figure the toe that the different combinations of suspension mounts produce? This is my first trf...
04-07-2007, 05:11 PM
Originally Posted by Ted B.
Is there a chart to figure the toe that the different combinations of suspension mounts produce? This is my first trf...
04-07-2007, 10:05 PM
Can anybody tell me if a 78t (64dp) spur will fit in a MSXX with a 48t pinion?? I want to buy this spur, but I'm not sure if it'll work out...
Thanx in advance!!
Thanx in advance!!
04-07-2007, 10:18 PM
Originally Posted by Rogier
Can anybody tell me if a 78t (64dp) spur will fit in a MSXX with a 48t pinion?? I want to buy this spur, but I'm not sure if it'll work out...
Thanx in advance!!
Thanx in advance!!
04-08-2007, 10:02 AM
Originally Posted by LBSR415
it should but why so radical? I run a 112 spur vs 30 -36 tooth in 19 turn
04-08-2007, 10:27 AM
Originally Posted by Rogier
Because it's a track with some long straights and I'm running 5 cells....
