ALPHA RC RACEWAY
#1321
Will Saturday hurry up and get here, I'm ready for some racing!!!
#1323
Tech Initiate
I got my truck back together and am ready to go....Kids have been buggin all week...think it cuz we missed practice last week. see you at the track
#1324
Tech Regular
iTrader: (13)
Ok folks lets have a little recap of Saturdays racing action. We had some races that stayed close the entire race and some races that where come from behind saves. Anyway on to the recaps.
Novice. We saw a new face in novice today and that was Jacob Ridings. He struggled a bit with his 22 buggy but a little tuning should help that out. Matthew Jacobs took the lead early on only to drop out early handing his lead over to Andrew Jacobs who held it to the wire. Jacob Ridings finished in second and Matthew rounded out the top three from the pits.
1/10th scale buggy open saw Roger Lowery take TQ honors and the early lead until Kyle Melvin found his way around and held the lead till the end leaving Roger to finish second and Derek Fisher in third.
4wd shortcourse was once again the class to watch. Kyle Melvin took TQ honors but Jim Pate moved him out of the way on the first lap taking the early lead. Darren Hooker Managed to slide past Kyle to take second early on while Kyle struggled with his truck for the first minute or so. Kyle got it sorted out and began his charge first passing Darren and then running down Jim. The two battled it out for a bit but Kyle was the eventual winner with Jim following in second and Darren in third.
Stadium truck saw Roger Lowery TQ and lead the race from wire to wire. I struggled a bit with the pipe early on while Wayne Jacobs cruised on in second. I finally gathered myself up and began chopping away at gap between Wayne and myself. I caught up to him once only to stuff the pipe and then later managed to capitalize when Wayne did the same a couple of laps later. That left us with a finishing order of Roger in first followed by myself and then Wayne.
2wd Shortcourse This is the come from behind story of the day. Roger took off early with the lead and had a rather huge one till his truck started making some noise. He backed it down a bit to make the finish and Jim took began to reel him in but it took till the end of the last lap to catch Roger. Roger let it all hang out trying to beat him to the stripe but Jim slipped through coming over the last jump to take the win. Bill Horman rounded out the top three with his fresh XXX-Sct.
Novice. We saw a new face in novice today and that was Jacob Ridings. He struggled a bit with his 22 buggy but a little tuning should help that out. Matthew Jacobs took the lead early on only to drop out early handing his lead over to Andrew Jacobs who held it to the wire. Jacob Ridings finished in second and Matthew rounded out the top three from the pits.
1/10th scale buggy open saw Roger Lowery take TQ honors and the early lead until Kyle Melvin found his way around and held the lead till the end leaving Roger to finish second and Derek Fisher in third.
4wd shortcourse was once again the class to watch. Kyle Melvin took TQ honors but Jim Pate moved him out of the way on the first lap taking the early lead. Darren Hooker Managed to slide past Kyle to take second early on while Kyle struggled with his truck for the first minute or so. Kyle got it sorted out and began his charge first passing Darren and then running down Jim. The two battled it out for a bit but Kyle was the eventual winner with Jim following in second and Darren in third.
Stadium truck saw Roger Lowery TQ and lead the race from wire to wire. I struggled a bit with the pipe early on while Wayne Jacobs cruised on in second. I finally gathered myself up and began chopping away at gap between Wayne and myself. I caught up to him once only to stuff the pipe and then later managed to capitalize when Wayne did the same a couple of laps later. That left us with a finishing order of Roger in first followed by myself and then Wayne.
2wd Shortcourse This is the come from behind story of the day. Roger took off early with the lead and had a rather huge one till his truck started making some noise. He backed it down a bit to make the finish and Jim took began to reel him in but it took till the end of the last lap to catch Roger. Roger let it all hang out trying to beat him to the stripe but Jim slipped through coming over the last jump to take the win. Bill Horman rounded out the top three with his fresh XXX-Sct.
#1326
I'll be there mike to help around 830 9
#1329
who's pump for tomorrow's race.I know I am can't wait.
#1330
Tech Master
Hi everyone, there is a possibility that I will be going to SIU for engineering. I was very excited to find this track online and drove by today. I don't have the time right now (or a strong internet connection) to read very much of this thread. I have a few questions to ask about the track.
Is there ever open practice or is it all just racing?
Where do you guys get parts?
Do the F1 cars break very easily if you clip the corner of a turn?
Thanks!
Is there ever open practice or is it all just racing?
Where do you guys get parts?
Do the F1 cars break very easily if you clip the corner of a turn?
Thanks!
#1331
Tech Adept
Hi everyone, there is a possibility that I will be going to SIU for engineering. I was very excited to find this track online and drove by today. I don't have the time right now (or a strong internet connection) to read very much of this thread. I have a few questions to ask about the track.
Is there ever open practice or is it all just racing?
Where do you guys get parts?
Do the F1 cars break very easily if you clip the corner of a turn?
Thanks!
Is there ever open practice or is it all just racing?
Where do you guys get parts?
Do the F1 cars break very easily if you clip the corner of a turn?
Thanks!
#1332
Good Luck to Ashton and Brian at Jconcepts Indoor Nats. Also good luck to everyone racing at Alpha today wish I could be there.
#1333
Tech Adept
First chance to local racers
I am selling most of my RC vehicles I thought I would give you guys a chance at any of the items before they hit EBay. These items will be placed on EBay on Feb. 23 2014 if not sold before then.
1) Tamiya TRF101 including a LRP speed control, 21.5 motor Speed Passion not installed, Savox steering servo, 1 battery, and a box of spare parts. Just add receiver and transponder Asking $300
2)XRay T3 2012 this car has been turned into a VTA car with a Hobby Wing just stock speed control, 25.5 Novak Boss VTA motor, Spektrum Steering Servo, 2 sets of glued VTA wheels and tires, one 5000 mah CRC VTA battery, some spare springs, and few parts and one body. Just add receiver and transponder Asking $350
3)TLR 22 with some hop up parts, LRP Stock Spec Speed Control, Reedy 13.5 Motor, Spektrum Steering Servo, wheels and tires, battery, and some extra parts. Just add receiver and transponder Asking $300
4)For Sale one Trinity D3.5 high torque 17.5 motor. Ran in 2 heat races and one 12th scale maine. Motor never got hot. Asking $75.00
5)XRay T4 2013 roller with 17.5 motor, low friction belts, and body. Just add steering servo, speed control, receiver, and Transponder Asking $350
6)KO Propo EX-1 transmitter with 3D drop wheel that has been lightened and one FHSS Micro Receiver For EX-1. Asking $400
PM me if you have any questions about any of it or want to purchase any or all of it
Thanks
Joe Roach
1) Tamiya TRF101 including a LRP speed control, 21.5 motor Speed Passion not installed, Savox steering servo, 1 battery, and a box of spare parts. Just add receiver and transponder Asking $300
2)XRay T3 2012 this car has been turned into a VTA car with a Hobby Wing just stock speed control, 25.5 Novak Boss VTA motor, Spektrum Steering Servo, 2 sets of glued VTA wheels and tires, one 5000 mah CRC VTA battery, some spare springs, and few parts and one body. Just add receiver and transponder Asking $350
3)TLR 22 with some hop up parts, LRP Stock Spec Speed Control, Reedy 13.5 Motor, Spektrum Steering Servo, wheels and tires, battery, and some extra parts. Just add receiver and transponder Asking $300
4)For Sale one Trinity D3.5 high torque 17.5 motor. Ran in 2 heat races and one 12th scale maine. Motor never got hot. Asking $75.00
5)XRay T4 2013 roller with 17.5 motor, low friction belts, and body. Just add steering servo, speed control, receiver, and Transponder Asking $350
6)KO Propo EX-1 transmitter with 3D drop wheel that has been lightened and one FHSS Micro Receiver For EX-1. Asking $400
PM me if you have any questions about any of it or want to purchase any or all of it
Thanks
Joe Roach
Last edited by Blitz81; 02-12-2014 at 08:43 PM.
#1334
Tech Adept
iTrader: (7)
Hello again guys, I decided to part out my stuff. Servos, receivers, transponders, speedos, motors, and rollers. Getting rid of all my 22 platform vehicles and everything that goes in or on them.
Text me if interested in anything and we can figure out prices. 618-322-0008.
Text me if interested in anything and we can figure out prices. 618-322-0008.
#1335
Tech Regular
iTrader: (13)
Hello again guys, I decided to part out my stuff. Servos, receivers, transponders, speedos, motors, and rollers. Getting rid of all my 22 platform vehicles and everything that goes in or on them.
Text me if interested in anything and we can figure out prices. 618-322-0008.
Text me if interested in anything and we can figure out prices. 618-322-0008.