Jon Kerr

iTrader: (17)

The facility is awesome. There were some traction problems throughout the day when it got real dry. My day ended early when I broke both 4wd and 2wd cars. The 4wd got the worst of it. There was either a section of the pipe had seperated or something but it took out the right rear. Arm, CVD, turn buckle, hinge pin, outdirve, and a hub carier. Two broken Lundsford turn buckles on the 2wd from slight, and I mean slight glances on the pipes and I packed it up. It was an Omen to go home

John Fontaine

iTrader: (2)

I had a great day on Saturday. Was 5th going into the A main for electric mod. Pulled out the big 7x2 for the main and took 2nd at the end. My car was flying! It felt like it had a 2nd gear going down the straight. Fukuyama cells did not let me down at all. They pulled hard and strong throughout the whole day. I had a blast.

John

Scott Welte

How was the driver turn out?, I know on Wednesday nights they need more people. Glad to hear that the track started out with some moisture.

Jon Kerr

iTrader: (17)

Four full heats. Ten cars in Expert Mod buggy. They lightly sprayed the track about 30 min before racing and opened practice back up. After practice was done and three heats, it was pretty dry by the time we got up there.

Maj. Teeth

Just wanted to post a Special Congratulation to some of our team drivers this past weekend!

1. Congrats to Rafael Angulo for TQ and winning the Florida States Champion race. Also all the other Fukuyama Racing Customer who placed in the A final and held it.

2. Congrats to Matt Howard and James Arluck, with Matt TQing and Winning while James came in 2nd to Matt. Both were on a neck to neck battle while the Fukuyama Cells were trying to out-punch each other! no one came near them. LOL..

3. Special Thank you goes too all the Fukuyama Racing customers for their fun-filled weekend of racing and their awesome support!

4. While some of our other Fukuyama Team Drivers were busy promoting or racing elsewhere, Thank you for your hard work.

Dan

Maj. Teeth

Just want to let everyone know that our Team Shirts are now available to our customers. Please visit www.fukuyamaracing.comi




Thank you

Dan

Maj. Teeth

Special NOTE!!

Our Fukuyama Motorsports Brushes will now be available for sale in our website and your LHS..



They are sold in 10 pairs each.

Dan

JasonC

iTrader: (120)

dan i sent you a PM

rangulo

I just wanted to thank Dan and Fukuyama Batteries. I can say that this last batch of cells is by far the punchiest cells I have had to date. I yanked on the throttle and my car was a rocket. My racing buddies said to me that my car had the most rip of all the racers. I was racing against trinity boys and fusion boys and Fukuyama Racing TQ'd every round and won by more than a straightaway....


There were 4 out of 10 in the main using Fukuyama.....

The best of the best---Fukuyama

Hardriven RC

LOL Dan, don't know the url to your own site?

Lucky for you we all know the way!

Regards

Charlie O

How do the fukuyama brushes add up to say the trinity 4505's there highest silver content laydown brush, and are they a cross cut design also?

stjerno

Any one out there know how to gear the Mako compare to other monster motors ?
I have tried different gearings but I get the fastest times with a lower total gearing (faster top speed) but the motor get pretty hot

If I undergear a little the motors runs cool but my lap times drop

So is the Mako tuned for more tourge/less rpm or

Thanks

rangulo

How big is the track. I can help with gearing but I need info on the track size and layout..... Is the track tight with a short straight away or is the track very open allowing the cars to carry a lot of corner speed!!!!!

Let me know..


Big tracks when the temp of the track is 130-140 6.75 to 7.2

Small tracks when the temp is hot 7.2-7.8

Night racing is different....

John Fontaine

iTrader: (2)

Got to get the best products back to the top.

Good luck racing everyone this weekend. I'm gonna rip it up at the 2nd of 5 races for the trinity ORL series on Sunday. Boy will it be fun.

John

Chris Tosolini

Hey rangulo whats up, I will be calling you right now!