wyd

iTrader: (51)

CRASH pm me you address again so I can get that package out to you.

WillS

iTrader: (32)

Has anyone seen any performance difference between reverse or high power brushed modes?

png

iTrader: (1)

any update on window vista foe castlelink?
manage to install the software, but no response once mamba max is connected to the usb port.

png

iTrader: (1)

installed castlelink 3.0, everything work perfectly.

HARDRIVE

Man I'm having a problem with mymm7700 again

Castle said cut off banana connectors and brade the wires and solder it
DONE THAT

Was working perfectly fine but now stuttering is back again

What could be the problem this time?
Anyone? Please help

Lazer Guy

iTrader: (1)

I have the 7700mm also and mine will do it with low amp battery's , works great with 5000 lipo's

wyd

iTrader: (51)

If he uses a Spektrum system it can also do that. Mine would failsafe all the time and hesitate. No more Spektrum no more problems.

HARDRIVE

Found the stuttering problem
I did a crappy job on soldering it hheheeheh

Or it came off when a darn tmax drove over my tc4

Thanx everyone specially to castle creations for making such a awesome brush less

I wonder what type of tires you guys are using on road sedan?

This mamba have so much power
I still spin out my foam tires
I'm using a kyosho foam tires

Drift Demon

iTrader: (1)

your telling me. even my 4600 has plenty of juice.

with polyethylene tires, which is much slippery than ABS, i can still hold heaps of speed through my drifts.

To me, i dont think anything could come close to a Mamba max...

HARDRIVE

I'm at the park as I speak errrr....... Type
Using my trusted sidekick3

Today I will find out which is faster

MAMBA VS NOVAK 3.5

SAME RTR TC4 SAME BATTERY
EXCEPT MOTOR ESC COMBO

My friend wants to drag racemy tc4 max
Ill post who will win hehehhe

Island Losi

iTrader: (3)

is it possible to solder the female end of the connector hard on to the circuit board on the esc so that i could use the shortest wire possible be still able to unplug the motor? this is for a mamba max 6900.

adamge

iTrader: (1)

island, it seems possible, and it seems like a pretty good idea. I would put the bullets vertically off the board. If you hang them off the side, there's a much higher chance of an impact that breaks them off the board and ends your run. Just make sure you have a big and hot soldering iron. It's hard to solder to the ESC's solder pads - the big heatsink sucks up a lot of heat.

Island Losi

iTrader: (3)

yup, vertical it was i was thinkin. im trying to see if i turn the esc parallel to the motor (415, xray t2, yokomo etc) i would save space and would not have to mount the receiver on the servo. i know the esc would stick out ov the chassis but i fugure u could get it closer to the center of the car. as for hooking up to the computer, just remove the motor (i don't need to do this that often.) ill post some pick when i get around to doin it.

RAP66

iTrader: (1)

I finally got out anf ran my Mamba &7700 motor HOLY!!!!!
but the down side is someone there at the track mentioned that the mamba wasnt legal for ROAR races... why??? is it case of the good ole boys club?

i really dont want to change systems...

Will the software install onto a PDA??

wyd

iTrader: (51)

CRASH did your package arrive?