Raydee

iTrader: (21)

Guys I just picked up a new TC4 and a Mamba Max 7700kv system. I have the stock 72tooth pinion and am running a Maxamps 2s2p 6000mah pack. What size pinions should I start off with?

overflow

iTrader: (8)

One thing you might want to do is get the steel outdrives. i have the tc4 and the 7700 and i melted them in no time!

Raydee

iTrader: (21)

Ok will do, any pinion recomendations to start with?

overflow

iTrader: (8)

im not an expert, but i would say start with a 22 and go from there.

adamge

iTrader: (1)

I would start with an 18t.

jaz

iTrader: (11)

Any update on the sensored motor functionality?

Joe Ford

What type of connection between the motor and ESC? ESC soldered directly to the motor, connectors in between, ??? Let me know. Also, what is your timing set to? You should have it set for normal timing advance ONLY. How close is the ESC to the receiver in the vehicle? What transmitter and receiver? Let me know.

Super_Roo

iTrader: (1)

The answer to this question was posted on Feb 10, post 199.

Does anyone remember the Monster Max? This too, was a myth.

Drift Demon

iTrader: (1)

I bought a Mamba Max 5700 about 6 months ago. I have not had any problems with mine. I took the motor out to inspect it, and i've noticed that the shaft has a lot of play in it, & im certain that its just the bearings have been worn down.

I use this motor on a TT-01 with the metal motor mount, but the mount moves back and forth a lil tiny bit, which is why i think the bearings have worn down. I will have to stick some paper around the mount to tightly secure it into place so that it wont move.

Now, has anybody done a bearing replacement for there CM36S motor. What size bearing do i use and what end of the motor should i open to replace the bearings??

Any help would be great. Thanks in advance...

grizzle

iTrader: (1)

Guys...do you know what bearing to get .... or any part no. for the replacement bearing for the mamba motor

CRASH

iTrader: (26)

The Mamba Max motors are sealed and are not serviceable. If you are having a bearing problem please contact Joe to try and remedy this problem. But you should not be having any sort of bearing problem.

913-390-6939 Ext 119

Later,

addicted

iTrader: (76)

hey Crash


I have a MMEsc that has cross polarity on it. Are these repairable. Really dont want to send it over if it isnt. or is it worth while.

Will Joe be in the office Monday

Regards

Tony

Drift Demon

iTrader: (1)

Thanks CRASH, as soon as i posted my problem i contacted Joe. The bearing problem is causing my motor to loose performance. I can feel & hear it stutter becuase there is so much play...

Drift Demon

iTrader: (1)

If i hard wire the motor to ESC, will this void the warranty??

Pacopin

Anyone has tryed the Mamba Max ESC with any of the new brushless sensored motors? (Orion Vortex, Nosram 3.5...).

What about the Tekin?