Team Br00d Racing Motors
12-11-2005, 10:58 PM
#2121
Sushi Man....our PRO monster armature is 100% compatible and legal for use in ANY monster based motor. Our PRO versions come with the comm cut, armature checked for straigtness, comm timing check, resistance check, winding check, and balance check.....we sell a non-pro version which will just be a armature directly from japan untouched.
DaRollaRacer, email me direct at [email protected] and I will help you out on the dyno graphs....
Superfly1967....our stock motors are based off the EPIC/Trinity teardowns.....we take a lot effort to put out the most competive stock motors in the world....and we have the results on the track to back it up. A lot of extra work is put into our stockers.....work that larger companies like trinity simply don't do. Our stuff is race ready out of the package.....
I will be answering all emails and PM soon.....just trying to catch up....
Later EddieO
DaRollaRacer, email me direct at [email protected] and I will help you out on the dyno graphs....
Superfly1967....our stock motors are based off the EPIC/Trinity teardowns.....we take a lot effort to put out the most competive stock motors in the world....and we have the results on the track to back it up. A lot of extra work is put into our stockers.....work that larger companies like trinity simply don't do. Our stuff is race ready out of the package.....
I will be answering all emails and PM soon.....just trying to catch up....
Later EddieO
12-12-2005, 12:08 AM
#2122
Originally Posted by jamescam
How dare you race when there is internet drama going on! Curse you! By the way please respond to my PM when you get the chance 
first thing when we got back.....on the tech, seems like we all use 2dayers to get a vacation
EddieO is a slave driver
just kiddinalso all Handwound 19 turns get the 19X1 right on the bottom of the can
-garrett
12-12-2005, 02:21 PM
#2124
Tech Master
peter that is not needed but thank you for your offer.
eddie thanks for the adult reply..it helps clear up alot.
eric i guess i will need to buy you a beer or two at the birds.
i also run tech at my races so yes i am always on the look out for grey area items. thanks bill
eddie thanks for the adult reply..it helps clear up alot.
eric i guess i will need to buy you a beer or two at the birds.
i also run tech at my races so yes i am always on the look out for grey area items. thanks bill
12-12-2005, 07:56 PM
#2125
getting into modified TC
Eddie, Peter, or anyone who can help...
I've run nothing but stock for years but am looking at getting into modified TC. The track I'll be racing on will have an approx. 100' smooth asphalt straight. What turn and wind arm would you recommend for a KR can? It's a club level competition.
Thanks a lot,
Brian
I've run nothing but stock for years but am looking at getting into modified TC. The track I'll be racing on will have an approx. 100' smooth asphalt straight. What turn and wind arm would you recommend for a KR can? It's a club level competition.
Thanks a lot,
Brian
12-12-2005, 09:21 PM
#2127
Tech Regular
Hey hit a homie up!
12-13-2005, 12:58 AM
#2128
Br00d will be carrying the IB4200......we will be one of the first with the new cell.....they will be matched by SMC for us....
Later EddieO
Later EddieO
12-14-2005, 01:32 AM
#2129
Will you guys still have the 3800"s?
12-14-2005, 08:33 AM
#2130
Yes, we will still be getting regular shipments of IB3800 packs.....a new shipment just came in yesterday.....
Later EddieO
Later EddieO
12-14-2005, 10:10 AM
#2131
Eddie YGPM
12-14-2005, 08:40 PM
#2132
Eddie, I purchased a blueprinted core stock from you to be tuned for 12th scale. What do you think would be a good starting point for roll out on this motor. Thanks for the help. Tenderfoot
12-15-2005, 12:30 AM
#2134
Eddie YGM
12-15-2005, 12:22 PM
#2137
co27
Well I probably missed it on here --- so I will ask anyway!
What is the latest on the new co27.
Preorder?
Coming soon just hold your horses?
and more importantly how much extra to have---- HOUND Wound stockers
Ok enough dogdoo humor
What is the latest on the new co27.
Preorder?
Coming soon just hold your horses?
and more importantly how much extra to have---- HOUND Wound stockers
Ok enough dogdoo humor
12-15-2005, 01:07 PM
#2138
They are saying Feb for the new stock.....hopefully before the birds, as they will probably want to sell them at the trinity booth....
I won't do preorders until I know they are the USA.....people get bent when hey expect something on day A and it arrives on day B....
Handwound stockers.....for what?
Later EddieO
I won't do preorders until I know they are the USA.....people get bent when hey expect something on day A and it arrives on day B....
Handwound stockers.....for what?
Later EddieO
12-15-2005, 01:15 PM
#2139
hound wound
someone had misspelled handwound(hound wound) a few posts back and I was taking a not so humorous liberty --------
well I drive like an old dog sometimes so maybe houndwound would be good for me~!
thx for the info I will order a few up as soon as you say go.
well I drive like an old dog sometimes so maybe houndwound would be good for me~!
thx for the info I will order a few up as soon as you say go.
12-15-2005, 01:34 PM
#2140
Originally Posted by EddieO
They are saying Feb for the new stock.....hopefully before the birds, as they will probably want to sell them at the trinity booth....
I won't do preorders until I know they are the USA.....people get bent when hey expect something on day A and it arrives on day B....
Handwound stockers.....for what?
Later EddieO
I won't do preorders until I know they are the USA.....people get bent when hey expect something on day A and it arrives on day B....
Handwound stockers.....for what?
Later EddieO
Need Invoices for the border today
12-15-2005, 01:50 PM
#2141
I just did them all, I can't send email from here, but you will have them in about an hour or so.....I just need to finish up one more project at work, so I can head over the track.....I did three like you wanted....one for the first order and one each for the other two....
Later EddieO
Later EddieO
12-15-2005, 05:49 PM
#2142
Tech Rookie
EddieO I would just like to say thanks........got to run my new Brood Monster Stock and IB3800's and instead of watching the competition scoot away I'm back toward the front of the pack.....My 12L was a rocket.....now if you only sold driving skill...........
12-15-2005, 06:13 PM
#2143
Yer telling me.....I go out there thinking I am doing ok.....even when I don't hit anything, I am still 1 second a lap slower.....I dunno how they do it....
Later EddieO
Later EddieO
12-15-2005, 10:50 PM
#2145
Must be the pimp juice.....cause my vision is 20/15 too...
Later EddieO
Later EddieO
12-16-2005, 09:45 AM
#2150
In onroad, I am usually off by 1 second.....offroad, well, thats another story....more like 2 seconds......what can I say, I lack the skill........
In other news....
CHECKPOINT motors will coming to br00d here shortly.......they are still working on pricing, but we will are officially going to be carrying them. The modified will have plastic endbell. According to the Checkpoint guys, the motors are still just as fast as the aluminum ones, but weigh less. Brushes, Springs, and other Checkpoint accessories will follow.
The NEW Atlas motors are just a couple of weeks away......they will have a new stock, 19t, and modified....
And lastly, our IB4200 packs will be here shortly.....SMC is going to match ours before even their own, so we will be the first company with them.....not sure on pricing yet, as we have yet to see what the numbers will be like....we have been told 430+ at 1.20+ at 35 amps.....crazy.
Later EddieO
In other news....
CHECKPOINT motors will coming to br00d here shortly.......they are still working on pricing, but we will are officially going to be carrying them. The modified will have plastic endbell. According to the Checkpoint guys, the motors are still just as fast as the aluminum ones, but weigh less. Brushes, Springs, and other Checkpoint accessories will follow.
The NEW Atlas motors are just a couple of weeks away......they will have a new stock, 19t, and modified....
And lastly, our IB4200 packs will be here shortly.....SMC is going to match ours before even their own, so we will be the first company with them.....not sure on pricing yet, as we have yet to see what the numbers will be like....we have been told 430+ at 1.20+ at 35 amps.....crazy.
Later EddieO
12-16-2005, 09:53 AM
#2151
Tech Elite
iTrader: (51)
Join Date: Feb 2002
Location: Comin at ya from a distant galaxy
Posts: 2,930
Trader Rating: 51 (100%+)
Cool EddieO, Cant wait to pick some up 
12-16-2005, 03:10 PM
#2153
So you guys are the loosers that have held the BQ helmet hostage!
Travis was supposed to get that to the next race after Portland and he flaked.
Can one of you get it to the Novak...then get it to Jared Scott to bring back to Florida for the Snowbirds. Jared might as well own the thing
Travis was supposed to get that to the next race after Portland and he flaked.
Can one of you get it to the Novak...then get it to Jared Scott to bring back to Florida for the Snowbirds. Jared might as well own the thing
12-16-2005, 11:40 PM
#2155
I asked this in another thread and didn't get a answer. Hope you don't mind me asking here. I have two motors (from other companies) that both have a very permanent mark on them. One has a red mark on the top of the pos brush hood, and another has a yellow mark on the can. I know why the marks are there (to easily id the pos side of the endbell and then to identify a handout motor for tech at a race). Can anyone tell me what to use to make the marks? It looks like a paint of some type. I know it is not sharpie as that wears off after a bit. This is permanent and is a little shiny. Any ideas? Thanks : )
12-17-2005, 12:29 AM
#2157
They often use fingernail polish for handout marks.....
Without seeing a picture or something, I can't be sure....
Later EddieO
Without seeing a picture or something, I can't be sure....
Later EddieO
12-17-2005, 01:21 AM
#2158
I was thinking this was kind of an industry standard. Really all I am trying to do is make the + end of my endbell easier to identify when it is in my car as I can not always see the + on the circuit board. Here's a pic of the two motors I have that have the marks. It seems to be rather thin and transparent. Ideas? Or is there something else I can use besides fingernail polish?
12-17-2005, 06:35 AM
#2159
Originally Posted by peter_robinson
well it wont be at the novak race or the snowbirds, i was told by both barry baker and jared scott that the BQ helmet is only for US national races i.e. carpet nats and on-road nats...
12-17-2005, 09:04 AM
#2160
Yes, we will be at carpet nats in full force.......Jared Wore it at Carpet Nats two years ago....then BK in portland just after that.....been with trav ever since....
Andrew, that looks like either Nail polish or a paint marker of some sorts.....either will work just fine for what your after....I like nail polish better, as its usually a laquer, so its more durable to our solvents.....most paint markers for models and such are enamels.....
Later EddieO
Andrew, that looks like either Nail polish or a paint marker of some sorts.....either will work just fine for what your after....I like nail polish better, as its usually a laquer, so its more durable to our solvents.....most paint markers for models and such are enamels.....
Later EddieO