Advanced Electronics Black Diamond ESC
#796
Hey guys I have 2 black diamond for sale they were ran 1 raceday each my sons and mine the track was just too far away for us, they were bought v2's 200,each there are in forsale thread. thanks
mke
mke
#797
V3 update brakes
Can anyone tell me if the brakes are stronger after the update?
Its the only problem I've got with the BD. Outdoor its great, but its not enough for some indoor carpet layouts for my driving style
I found that its necessary to run tall gearing to get the best out of it, but this reduces the effectiveness of the brake
Its the only problem I've got with the BD. Outdoor its great, but its not enough for some indoor carpet layouts for my driving style
I found that its necessary to run tall gearing to get the best out of it, but this reduces the effectiveness of the brake
#798
Hey guys im running my bd v3 in a 17.5 non boosted class just wondering if i should play with my throttle settings to get the max potential out of the esc any recomendations or just leave them at stock settings?
Thanks Rob
Thanks Rob
#799
Tech Master
iTrader: (3)
Can anyone tell me if the brakes are stronger after the update?
Its the only problem I've got with the BD. Outdoor its great, but its not enough for some indoor carpet layouts for my driving style
I found that its necessary to run tall gearing to get the best out of it, but this reduces the effectiveness of the brake
Its the only problem I've got with the BD. Outdoor its great, but its not enough for some indoor carpet layouts for my driving style
I found that its necessary to run tall gearing to get the best out of it, but this reduces the effectiveness of the brake
#800
Yes I found brakes different between motor brands also, and with most other ESC's
I use Graupner 6564 / Corally red 13.5
FDR 4.45
#801
I had very good brakes no matter which combination and gearing I used.
A friend was running a Graupner geared around 4.5 and was complaining about his brakes but I had no problems at all.
Skiddins
#802
Tech Elite
iTrader: (15)
I have run an HPI Flux Pro, Reedy Sonic and Corally ProRed. All of them 13.5's and geared from 4.0 down to 6.9
I had very good brakes no matter which combination and gearing I used.
A friend was running a Graupner geared around 4.5 and was complaining about his brakes but I had no problems at all.
Skiddins
I had very good brakes no matter which combination and gearing I used.
A friend was running a Graupner geared around 4.5 and was complaining about his brakes but I had no problems at all.
Skiddins
#803
Sadly not manged to melt it before I could (through bad meshing after a crash I think)
They do come with a lot of timing, a bit like the x12's so be carefull if you do run one. Either take the timing on the motor back to -5 or start the ESC timing at 30deg, then get the gearing correct, probably quite low, then add a little timing keep an eye on the temps.
Skiddins
They do come with a lot of timing, a bit like the x12's so be carefull if you do run one. Either take the timing on the motor back to -5 or start the ESC timing at 30deg, then get the gearing correct, probably quite low, then add a little timing keep an eye on the temps.
Skiddins
#809
hey guys a have a black diamond 4002 and the 16 v capacitor broke off rite at the negative terminal at a part thats un fixable can i run this without it probably not rite? so will any capacitor due the trick or do i need to get another one just like this
#810