Advanced Electronics Black Diamond ESC
#946
Hey guys is there a different version of this speedo for 12 scale racing?
#947
Tech Elite
Join Date: Dec 2005
Location: 5280 Raceway. Denver's finest RC facility
Posts: 4,780
i ran one of my advanced speedos in f1 at vegas. i still love the way this speedo feels. my car was a rocket. and yes, i failed in the main.
#948
Ok so found the other model are they still making the LV version for 1 cell application?
#949
I think the very early version was for 1/12, but the later versions are compatible with 1/12 (allow for receiver pack attachment etc)
Skiddins
Skiddins
#950
#951
#952
Tech Regular
I have had my v2 upgraded to the v3 apart from updatability what else would going to the newer firmware do???
Thanks
Thanks
#953
There is also the drive frequency adjustability
Brake profiles have been adjusted as well.
I believe there might be some other bits I can't remember
Sadly I only got three races out of the latest firmware before I blew mine up
The advantage of the latest bootloader type firmware is that any future firmware releases can be upgraded by yourself.
Skiddins
#954
Tech Regular
The delay between the mid timing and high timing now acts as a timing 'ramp' between the two instead of a simple delay.
There is also the drive frequency adjustability
Brake profiles have been adjusted as well.
I believe there might be some other bits I can't remember
Sadly I only got three races out of the latest firmware before I blew mine up
The advantage of the latest bootloader type firmware is that any future firmware releases can be upgraded by yourself.
Skiddins
There is also the drive frequency adjustability
Brake profiles have been adjusted as well.
I believe there might be some other bits I can't remember
Sadly I only got three races out of the latest firmware before I blew mine up
The advantage of the latest bootloader type firmware is that any future firmware releases can be upgraded by yourself.
Skiddins
#955
I have been running the latest update. Exactly what I had hoped Per would come up with. Complete control of the top timing ramp. The previous update gave fantastic feel in the brakes. This is the complete package now. Simply perfect, perfect.
#956
Should get my repaired BD and another with update back this week. Then I get to test again.
#957
Tech Regular
Hi
Got a bd with 3.0.1 ace firmware on it want to update to the newer on my pc can read the esc and all but all the fw upgrade box says is speedi not ready for new firmware ??
Any ideas
Thanks
Got a bd with 3.0.1 ace firmware on it want to update to the newer on my pc can read the esc and all but all the fw upgrade box says is speedi not ready for new firmware ??
Any ideas
Thanks
#958
Unfortunately you need firmware 3.4 onwards to be able to update firmware yourself. You'll have to send yours back to Sweden, unless Mike at Modeltech can do the upgrade
#959
I just bought a BD with v3 in it. Does these speedos work good on offroad. I run a sc10 2wd blinky 17.5 and mod 7.5.
#960
For Mod you might need a small fan on top, but they don't get anywhere near as how as a lot of other ESC's
Remember to run a low profile in Mod.