cherry2blost

iTrader: (1)

New Speed Passion 410 profile. Download New_beta_software_-_Stock_class_only_Software_100410STO... from FileFactory.com

410 is installed, on the bench seems very very quick, has a two stage on the pre Supercharger though, a definite step at about 1/2 throttle then the almighty wind up on the Supercharger, sounds like it's going to explode lol.

I have listed the 'base' settings here...

[/QUOTE]

AGNO

FW 324 is available with the function 11 with 2 values, does anyone know what they are?

cherry2blost

iTrader: (1)

Agno I can't say I have come across that issue however I tend to just step over function 11 until we find out what they are doing with it.

AGNO

[/QUOTE]

I think the 410 is not yet final, it still proplemi with DRRS, plus calls at the end of loading to be updated (please upgrade software).
The 324 seems to work rather well, the problems have disappeared with the DRRS and function 15 now has 9 values.

AGNO

Ok thanks Cherry, waiting for information.

gazmond

Good work Cherry!!

Couple of questions about installation, you mentioned on the SP thread that it has only options for V1.02 does that mean the LCD boxes need downgrading to 1.02 to work?

Also anything we need to know like installing the software twice like some of us had to do with the 230/231 software that you've discovered?

cherry2blost

iTrader: (1)

Seems to have lost the ability to change settings with the LCD card is a work in progress release which was 'inadvertently' released .

Always do a double install, always do a radio reset no reason not to as has always worked in the past.

Be careful with this one seems there are some 'issues' think with this one use at own risk is a definite.

Don't need to downgrade LCD box but software will keep complaining about updating the software, adjustments on this are ONLY through the LED card the settings 'apply' button is greyed out on this version.

gazmond

Care to elaborate?


Thanks for the info will give this a go tonight, cheers!

Darrin70

iTrader: (1)

Tested last night with 231.... Bit slow on the bottom, I don't see 324... I had to do the copy control_version from HW and place it into the SP folder to even get the SC to work.... Wondering how do I get the 324 software?

Darrin70

iTrader: (1)

Looks like it is your Motor rotation 1= Counter Clockwise 2=Clockwise

cherry2blost

iTrader: (1)

324 is part of the update above along with the newer 410.

Darrin70

iTrader: (1)

Thanks Cherry... but when I put replace the earlier version with 410 in the SP folder, it asks to download... Do I just hit download?

Thanks

cherry2blost

iTrader: (1)

Didn't happen with mine?? you using SP 1.32??

cherry2blost

iTrader: (1)

Link to the 324 stuff is a better place than the 410.

Akudou

iTrader: (2)

Cherry2blost- you have pm