NEW XRAY T2
#5506
Originally Posted by TRESFR
Where can I find the duraluminum diff halves. I only can find the hole diff and every other part for it . Are they sold seperately
But there is stock of the fk'04 ones. They fit also.
#5507
Originally Posted by Joep
No they are not sold seperate.
But there is stock of the fk'04 ones. They fit also.
But there is stock of the fk'04 ones. They fit also.
#5508
Originally Posted by AChupp2
What is the part number?
30 5010 ALU DIFF LONG OUTPUT SHAFT - HARD COATED
30 5020 ALU DIFF SHORT OUTPUT SHAFT - HARD COATED
#5509
Guys im moving up to mod (from stock) but have NO idea of gear ratio....i will be running and xray t2 with 84 spur(48p) orion v2 tx2 on standard sorex 28s and matched 4200s
What pinion should i use?
Thanks,
Nick
What pinion should i use?
Thanks,
Nick
#5510
T1FK05
I am selling my super clean XRAY T1FK05. Check it out.
http://www.rctech.net/forum/showthread.php?t=126562
http://www.rctech.net/forum/showthread.php?t=126562
#5511
Tech Apprentice
looks like a very nice clean car. Im sure it will sell quick.
#5512
Tech Fanatic
iTrader: (2)
Originally Posted by TRESFR
Where can I find the duraluminum diff halves. I only can find the hole diff and every other part for it . Are they sold seperately
#5513
Those Look Good
Originally Posted by THE DARKSIDE
www.darksidems.com Part number 450. Black Anodized Aluminum FK'05 & T2 outdrive sets
Thanks again
#5514
Guys im moving up to mod (from stock) but have NO idea of gear ratio....i will be running and xray t2 with 84 spur(48p) orion v2 tx2 on standard sorex 28s and matched 4200s
What pinion should i use?
Thanks,
Nick
What pinion should i use?
Thanks,
Nick
#5515
Hi nick, on a big outdoor circuit with a 10x1 in i will run between at 22 and a 24 wit my T2 and 84Spur,
Indoor on polished wood, or on a small track i would use between a 19 and 21 pinion,
Hope this helps,
Luke
Indoor on polished wood, or on a small track i would use between a 19 and 21 pinion,
Hope this helps,
Luke
#5516
Originally Posted by AChupp2
What is the part number?
305020 Alu Diff Short Output Shaft Hard
#5517
Tech Fanatic
iTrader: (2)
Originally Posted by TRESFR
I appreciate the help however, how do you justify selling the diff halves for a dollar less than you can buy a new diff. Are these diff halves unbreakable. I run 4.5 novak on carpet and high bite asphalt.
Thanks again
Thanks again
#5520
Originally Posted by luke humphrey
Hi nick, on a big outdoor circuit with a 10x1 in i will run between at 22 and a 24 wit my T2 and 84Spur,
Indoor on polished wood, or on a small track i would use between a 19 and 21 pinion,
Hope this helps,
Luke
Indoor on polished wood, or on a small track i would use between a 19 and 21 pinion,
Hope this helps,
Luke