Yokomo MR4TC-BD
#2071
Tech Fanatic
Ran my BD last night for the first time ever. I was indoor on carpet and boy it had some rip. Think i need to go buy some pre glued CS22's on the dish wheels though as mid way through the run the rear end would come really loose and start soming around. Everyone else was running the pre glued 22's and i was on a set of 22's with a foam insert in and you could hear the tyres squeeling mid run.
#2072
R/C Tech Elite Member
iTrader: (47)
Originally Posted by Matt Howard
There's actually 5 holes crammed into that rack. the further forward you move the ballstud the more turn-in steering you'll get while sacrificing some onpower steering.
#2074
Tech Elite
iTrader: (9)
Hey Randy,
Good luck this weekend. Make us BD owners glad we bought the right kit. LOL
I might stop by Sunday breafly just to take in some invitational...Heard it is the cat's meow...
Just got the LCG put together....Makes me glad I run Yokomo...
The LCG is the BD of shaft cars...
I posted pics on the SD thread if you want to take a look.
Also there is a question that maybe you could help with...
I can not get the rear of the LCG below 6mm. I have the short ball ends already.
Thanks,
Stephen <><
Good luck this weekend. Make us BD owners glad we bought the right kit. LOL
I might stop by Sunday breafly just to take in some invitational...Heard it is the cat's meow...
Just got the LCG put together....Makes me glad I run Yokomo...
The LCG is the BD of shaft cars...
I posted pics on the SD thread if you want to take a look.
Also there is a question that maybe you could help with...
I can not get the rear of the LCG below 6mm. I have the short ball ends already.
Thanks,
Stephen <><
#2076
Tech Elite
Join Date: Mar 2004
Location: MOOD;; feeling good not racing ,saving shed loads of money,lovely Tan i have aswell
Posts: 4,762
Originally Posted by Matt Howard
Yokomo
Spring Rating [lb/in]
Orange 18.87
Green 16.06
Pink 14.93
Yellow 14.71
White 12.94
Blue 12.12
Rayspeed
Spring Rating [lb/in]
Gray 19.90
Red 18.26
White 17.17
Yellow 14.87
Blue 14.29
Green 13.20
Spring Rating [lb/in]
Orange 18.87
Green 16.06
Pink 14.93
Yellow 14.71
White 12.94
Blue 12.12
Rayspeed
Spring Rating [lb/in]
Gray 19.90
Red 18.26
White 17.17
Yellow 14.87
Blue 14.29
Green 13.20
i will be using rayspeed springs from now on
i think the mr4 ones are not of the same quality, they vary from one pair to another
got me them rayspeed cups as well, running for the first time tonight with the AE2005 conversion
#2077
Tech Elite
iTrader: (9)
Originally Posted by Randy Caster
Thanks Shook, I'm gonna drive as hard as I can this weekend, and hopefully I'll just get lucky and it'll pay off.
Just put the Rayspeed spring retainers on your LCG and you'll be able to make ride height.
Just put the Rayspeed spring retainers on your LCG and you'll be able to make ride height.
I have the the same shock setup as the BD but still not sitting low enough.
Any other clues?
Thanks,
Stephen <><
#2078
Tech Elite
iTrader: (9)
Originally Posted by MR JOLLY
matt your a geniues
i will be using rayspeed springs from now on
i think the mr4 ones are not of the same quality, they vary from one pair to another
got me them rayspeed cups as well, running for the first time tonight with the AE2005 conversion
i will be using rayspeed springs from now on
i think the mr4 ones are not of the same quality, they vary from one pair to another
got me them rayspeed cups as well, running for the first time tonight with the AE2005 conversion
http://www.rcingreece.com/index.asp?...ing_comparison
Stephen <><
This can very helpfull when in a jam. I keep this printed out in my pitbox.
Funny thing though it ends up helping alot of people.
#2080
Tech Elite
iTrader: (9)
Originally Posted by Randy Caster
Bring it by the track on Sunday, I'll take a look at it for you and figure something out. If you're running the RS springs instead of Yokomo that would be the problem..
Maybe with the LCG it lowered it so much I have to shorten everything else.
I will have to try something soon.
Stephen <><
#2082
Mr Shookie
Hi! How are the Speed Racing knuckles from Precision RC holding up?
Thanks - Lem
Thanks - Lem
#2083
Tech Fanatic
Originally Posted by Chrissy C
Rick, CS22 with a Yok 37m insert on Pro line 26mm wheels will work well on carpet. Used the combo on my SD to good effect.
Chris
Chris
#2084
Tech Champion
iTrader: (6)
Originally Posted by Randy Caster
Hey Matt, with the front ackerman hole on a flipped plate, will the steering linkage hit the inner suspension mounts?
#2085
Tech Champion
iTrader: (6)
Originally Posted by Mr. Shookie
If you think he is a genuis...J/K Matt nothign but love for you bro.
http://www.rcingreece.com/index.asp?...ing_comparison
Stephen <><
This can very helpfull when in a jam. I keep this printed out in my pitbox.
Funny thing though it ends up helping alot of people.
http://www.rcingreece.com/index.asp?...ing_comparison
Stephen <><
This can very helpfull when in a jam. I keep this printed out in my pitbox.
Funny thing though it ends up helping alot of people.