Schumacher Corner
hi.
Just wondering who will be running their Schumacher cars at the Snowbirds
Tech Elite
iTrader: (32)
If I was there I'd be wearing my Schumacher T-shirt. That count?
Originally Posted by whoopass
Ran the Schum MI2EC yesterday at WLRC and TQ'd by a mere 9 seconds in 27T on the cars first outing.
The car was smooth all day and I was quite impressed.
Big thanks to Schum driver James Howarth for the Spur gear and the setup tips. Roll on Aldershot next Sun...
links to results:-
http://www.wlrc.co.uk/results/07_01_...Qualifying.htm
The car was smooth all day and I was quite impressed.
Big thanks to Schum driver James Howarth for the Spur gear and the setup tips. Roll on Aldershot next Sun...
links to results:-
http://www.wlrc.co.uk/results/07_01_...Qualifying.htm
Were you running a ROAR?
Skiddins
Tech Regular
iTrader: (23)
Originally Posted by PW
Just wondering who will be running their Schumacher cars at the Snowbirds
I will be.
Make some Phat guy shirts though!!
Last edited by daddyphat808; 01-17-2007 at 02:46 AM.
i dnt think its the lay shaft because the front diff is fine while in place its just the rear diff i have tried both two diffs and im havin the samne problem
does the r 12 front drive belt fit the first mission by chance
Super Moderator
iTrader: (239)
Originally Posted by nemisis
does the r 12 front drive belt fit the first mission by chance
When you guys mount bodyshells on the EC how far back do you mount the shell, how big is the gap between the bumper and the front of the shell?
I know bodies vary but what sort of gaps so you guys use for the various bodies and surfaces?
I have a PF DNA1 and a Mazda 6
Skiddins
I know bodies vary but what sort of gaps so you guys use for the various bodies and surfaces?
I have a PF DNA1 and a Mazda 6
Skiddins
Tech Master
iTrader: (5)
hey guys does 27tooth pinion to a 90 tooth spur sound about right for a co27 stock motor? on medium to open track?
also is f brush a good brush?
and what color springs im running blue/green on negative and positive?
cheers its been so long since i ran stock lol
also is f brush a good brush?
and what color springs im running blue/green on negative and positive?
cheers its been so long since i ran stock lol
Tech Champion
iTrader: (4)
Originally Posted by aus jd 2703
hey guys does 27tooth pinion to a 90 tooth spur sound about right for a co27 stock motor? on medium to open track?
also is f brush a good brush?
and what color springs im running blue/green on negative and positive?
cheers its been so long since i ran stock lol
also is f brush a good brush?
and what color springs im running blue/green on negative and positive?
cheers its been so long since i ran stock lol
Tech Champion
iTrader: (264)
Originally Posted by Skiddins
When you guys mount bodyshells on the EC how far back do you mount the shell, how big is the gap between the bumper and the front of the shell?
I know bodies vary but what sort of gaps so you guys use for the various bodies and surfaces?
I have a PF DNA1 and a Mazda 6
Skiddins
I know bodies vary but what sort of gaps so you guys use for the various bodies and surfaces?
I have a PF DNA1 and a Mazda 6
Skiddins
Tech Champion
iTrader: (22)
Originally Posted by aus jd 2703
hey guys does 27tooth pinion to a 90 tooth spur sound about right for a co27 stock motor? on medium to open track?
also is f brush a good brush?
and what color springs im running blue/green on negative and positive?
cheers its been so long since i ran stock lol
also is f brush a good brush?
and what color springs im running blue/green on negative and positive?
cheers its been so long since i ran stock lol
Tech Master
iTrader: (5)
yeh not keen on 64 pitch as ive heard bad things about pebbles and 64pitch gears
Tech Champion
iTrader: (22)
thats funny....I guess in all the years I have been racing i might have lost 5 spurs due to pebbles...thats not even 1 a year...guess it also helps that we run on mostly prepared surfaces that are pretty clean