katfish317

iTrader: (6)

+2 on rubber setup!!!

AssocRacer

iTrader: (10)

Or you can ask Dr. Hohnstein for some advise. He seems to be THE MAN when it comes to setting up a rubber car.

quietstorm76

iTrader: (12)

Guys, on the setup sheet there is a place that says "hex spacing". What's the part # for the spacers and where do I put them? Between the hex and wheel or behind the hex?

Thanks

Kraig

iTrader: (81)

It goes hex, spacer, and then wheel. What it is doing is moving the wheel out on the axle a little bit.

Hide

iTrader: (8)

Can anyone recommend a setup stationboard for me? I have seen the Hudy ones but they are very expensive...

AssocRacer

iTrader: (10)

I use the Integy one, was like $50. A little more if you order the one with the case. And i think you can get the one that comes with the board and the set up wheels for like around $100.

AssocRacer

iTrader: (10)

This is the one i got.

http://www3.towerhobbies.com/cgi-bin...?&I=LXKTR2&P=7

or there is this one:

http://www3.towerhobbies.com/cgi-bin...?&I=LXLYV5&P=7

Either way, i think they are cheaper then the Hudy ones.

geeunit1014

iTrader: (14)

you get what you pay for

ive had the integy ones, didnt like them. fit wasnt too great, and they tended to be sloppy.

if you dont need the whole setup system you can get just the hudy blocks, my lhs has them for 130, can prolly find cheaper online.

quietstorm76

iTrader: (12)

Thanks man. What do the spacers look like? Got a part #?

SRW141

iTrader: (4)

Speedmind makes an awesome setup station. Ampdraw has them for a good price.

losithrasher

that first link, those gauages are awesome, i use the hoffs all the time. the second link, the gauges that come with the board, those gauges suck!

katfish317

iTrader: (6)

You just have too use a flat thin washer and measure them

K_Spec_RC

iTrader: (8)

I just used the Xray spacers : http://www.nexusracing.com/product_i...roducts_id=466

Kraig

iTrader: (81)

These also work if you are color sensitive, http://www.nexusracing.com/product_i...oducts_id=1908.

yodace

iTrader: (8)

How would i fix a loose rear end? I'm running the kit Tc5R setup? Asphalt sprayed with pop>>



Do kimbrough spurs work will on the car?