Hebiki

iTrader: (26)

its the tray designed for the TC5. i just gotta dremel some material off for the servo mount and the motor bulkhead support. i only use orion 3600/3800s. im gonna open them up, redrill the holes and flip them upside down so the feet are facing upwards.

Brian L

iTrader: (21)

I ended up pretty close to what Martin had. I believe he said it was close to one of Victor's setups. I will have to check them out and let you know. I didn't have a Speed 6 body and had different shock oil. I threw away a A-main run in the last round after putting a spool in and trying to figure out how to drive it. Car was good, driver failed.

habis

iTrader: (1)

any one have the oppertunity to post the TRF teams rubber/carpet set-up from IIC?

habis

iTrader: (1)

any one tried the 2,5 mm chassis yet??????????

Tpg racer

Sorry to ask this rather ridiculous question in this thread guys but I didnt wana caught the whole forum's attention....

Is there any problem with the stock TRF 416??? I mean im in a split decision in getting one but right now im split between a TRF416 or a TOP Scythe...

Sorry to have brought up this question here but can anyone guide me, which should I get... parts support for both manufacturer is kinda equal at my place...so which to get???

artwork

iTrader: (88)

I have spent a lot of time looking at both very closely...the answer is simple if you are going to run rubber tire buy the 416. It is such a beautiful car that performs like no other on rubber tire car out there. If you want a foam car the 416 might not be the best choice.

over gear

iTrader: (18)

does tamiya ever sell an alloy rear hub for the 416?

RC MARKET

iTrader: (12)

Yes HPI springs is best !

Hebiki

iTrader: (26)

i have it for my car... but won't be able to try it until october

Hebiki

iTrader: (26)

+1

Tpg racer

Im going to run rubber and only rubber on asphalt... looks like i'll try to get the 416 then....

artwork

iTrader: (88)

I think 3racing makes them not Tamiya.

syndr0me

iTrader: (32)

There seems to be three options:

3 Racing (0 & 1 degree):
http://rcmarket.com.hk/product_info....oducts_id=2464

Unknown:
http://rcmarket.com.hk/product_info....oducts_id=3369

Square:
http://rcmarket.com.hk/product_info....oducts_id=3912

I've been using the unknown version, since that's what was first available. It works well, though maybe just a tiny bit sloppy on the bearing tolerances.

Also, that Square bumper is the greatest thing ever. I spent a small fortune on spares for IIC and didn't break anything the entire weekend. RC MARKET, pls to be having more soon!

Superkarter

iTrader: (2)

Square make a really nice alloy rear hub for the 416

Hebiki

iTrader: (26)

need to keep it TCS legal.