RC10B4.1 FT/WC
#6961
im running novak gtbs in my cars lol kind of want to swap to some lrp gear again, if i can find some good ol sphere cheap on here :P
#6962
supp brett! how come mr.kyosho surfin the b4 thread??
#6963
Got my hands on one with a +8 chassis to try out and make sure im not missing anything spectacular. I ran a B4 back in the day, it's really just curiosity to see how much better it is. And I need to keep my eye on you!! :
#6964
and do you run the kyosho shocks or the AE ones?
#6965
It rotates better entering a corner, and you can exit faster.
#6966
where do you see that a front kyosho orange is 2.1? Every chart i have seen rates it at a 2.78, just under a AE brown.
http://www.petitrc.com/reglages/BuggySpringChart.pdf
http://www.petitrc.com/reglages/BuggySpringChart.pdf
I corrected my post so that other people won't find it and get confused about spring rates
#6968
#6969
Tech Adept
iTrader: (1)
Joined: Oct 2009
Posts: 118
got the plus 8mm dialed at my local indoor track, running paul wynn's set up with inline front hubs without moving the spacer to the front, with brown ae front springs 5 shims, unscrew rod end 1/2 turn 32.5(lower inside hole), rear kyosho black spring 27.5,
car was almost un drivable without inline hubs!
car was almost un drivable without inline hubs!
#6970
got the plus 8mm dialed at my local indoor track, running paul wynn's set up with inline front hubs without moving the spacer to the front, with brown ae front springs 5 shims, unscrew rod end 1/2 turn 32.5(lower inside hole), rear kyosho black spring 27.5,
car was almost un drivable without inline hubs!
car was almost un drivable without inline hubs!
#6972
No I don't think I'll be out until the AKA series starts. Been racing up here the track is really good and pretty much have it all to ourselves most the day. I am designing a new layout so should be busy all weekend. And flying Saturday morning! I saw you posted your running Nolan's setup but the info you posted is about a quarter of it do you have the whole thing on paper? Try to post it! His chassis looks super dialed!! I'm not even sure I'll be running the B4 for a few weeks at least just to busy!
#6974
Joined: Nov 2004
Posts: 2,974
From: Norwood, OH...and CCRCR and The OhioRCFactory
Hell, he hasn't even driven it under brushless power yet
#6975
ThunderbirdJunkie better get his self ready for some wheel standing, crazy launching action! My first brushless experience I flipped my B4 onto its lid at the starting gun. Slightly embarassing.....



