9LikesLosi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
10-18-2011, 08:31 AM
Can we get past this?Or just have buck close all the threads?It`s coming!!
10-18-2011, 08:36 AM
Well, I have to say that officially, I am an official on this official thread officially about the SCTE.
I want to hear about anything and everything that comes out about it, that includes posting pics, hearing options, and opinions.
If someone has some cool prototype stuff and we get updates as they go along, thats great.
I enjoyed hearing about the new viper system, and the bce chassis, and the snr components...etc, etc, you get my gist. This is everything SCTE, all the time!!!!
Pushing product on others, that is not right. Giving your opinion, totally cool.
As for Bickering...take it to PM or give yourself a time out for crying out loud, most of us are adults.
Now, post away about your truck and the fun that you have had and any help you want to provide to others.
I want to hear about anything and everything that comes out about it, that includes posting pics, hearing options, and opinions.
If someone has some cool prototype stuff and we get updates as they go along, thats great.
I enjoyed hearing about the new viper system, and the bce chassis, and the snr components...etc, etc, you get my gist. This is everything SCTE, all the time!!!!
Pushing product on others, that is not right. Giving your opinion, totally cool.
As for Bickering...take it to PM or give yourself a time out for crying out loud, most of us are adults.
Now, post away about your truck and the fun that you have had and any help you want to provide to others.
Last edited by hacker07; 10-18-2011 at 08:53 AM.
10-18-2011, 08:40 AM
It's nice to see the official reps. can keep a level head, when the rest of us can't.
10-18-2011, 08:41 AM
FTW fan mount
any one had any issues with this ftw part?
http://www.shortcourse.eu/wp-content...bonParts-1.jpg
http://www.shortcourse.eu/wp-content...bonParts-2.jpg
no cracking with the cf plate or braking the fan with hard impacts?
http://www.shortcourse.eu/wp-content...bonParts-1.jpg
http://www.shortcourse.eu/wp-content...bonParts-2.jpg
no cracking with the cf plate or braking the fan with hard impacts?
I have been running the fan mount with the original fan on my 1st gen SCTE ever since the truck came out. I have never had any problems. I do recommend mounting the fan with shock o rings between the fan and the mount for isolation. Hope this helps.
Brian
10-18-2011, 08:46 AM
An un-official scale (mind you, internal temps so a temp gun might not match this):
led 1 is about 120 and below
led 2 is about 120 to 140
led 3 is about 140 to 160
led 4 is about 160 to 180
led 5 is about 180 to 200
led 6 is about 200 to 220
led 7 is about 220 to 250
and the esc goes into thermal shutdown to protect itself around 270
ESC's can take a LOT more heat than a motor with no risk of damage, so thermalling an esc only costs you the race, not a rotor or fets or anything. As its been said, if you are at or below 6 leds don't worry about anything. The leds in the tekin are the best way to tell how hot the esc is, not a temp gun.
led 1 is about 120 and below
led 2 is about 120 to 140
led 3 is about 140 to 160
led 4 is about 160 to 180
led 5 is about 180 to 200
led 6 is about 200 to 220
led 7 is about 220 to 250
and the esc goes into thermal shutdown to protect itself around 270
ESC's can take a LOT more heat than a motor with no risk of damage, so thermalling an esc only costs you the race, not a rotor or fets or anything. As its been said, if you are at or below 6 leds don't worry about anything. The leds in the tekin are the best way to tell how hot the esc is, not a temp gun.
thermalling is about 210 just remember that the on board temp is more accurate than a temp gun on heat sink.
10-18-2011, 08:48 AM
I have actually found thin slices of nitro fuel tubing to be better at this than o rings , seems to cushion better IMO .......
10-18-2011, 08:50 AM
Well i guess its OFFICAL THEN!....
glad to find a place where a company rep hangs out....
This has been a very informative thread for me personally,without asking anything hardly at all...
Lets all just KEEP it that way and enjoy the wealth of R&D we are getting at someone else's expense.......
Now,evryone back to the topic at hand...........
Who was KICK'N ARSE with their SCTE this past weekend??
glad to find a place where a company rep hangs out....
This has been a very informative thread for me personally,without asking anything hardly at all...
Lets all just KEEP it that way and enjoy the wealth of R&D we are getting at someone else's expense.......
Now,evryone back to the topic at hand...........
Who was KICK'N ARSE with their SCTE this past weekend??
10-18-2011, 08:53 AM
DONT WASTE MONEY ON ANYTHING OR ANYWHERE ELSE ESPECIALLY A CRAPAMPS PRODUCT !
http://feathermerchantrc.com/
http://feathermerchantrc.com/
http://www.ebay.com/itm/170615236018...84.m1423.l2649
10-18-2011, 08:56 AM
What kind of drop in temps have you seen with it?
10-18-2011, 08:56 AM
I posted this on the Official Pimping thread. but I think it would belong here also.
Is there any chance the first page of the SCTE thread can have all applicable ESCs and Motors readded? I guess I am part Tekin cheeleader, Castle Crackhead, Fuze Follower and potential Viper A$$hole, so I like to know what works and what doesn't, I don't care which company makes it.
I guess it just seems like too much argueing, considering these really are only toy cars.
Is there any chance the first page of the SCTE thread can have all applicable ESCs and Motors readded? I guess I am part Tekin cheeleader, Castle Crackhead, Fuze Follower and potential Viper A$$hole, so I like to know what works and what doesn't, I don't care which company makes it.
I guess it just seems like too much argueing, considering these really are only toy cars.
10-18-2011, 08:59 AM
reason i ask is i felt a set from a guy at the track who didnt drill the holes. Just followed tje "bump" video. So it seems they will have a different feel depending if u use the bleed holes or not? Guess ill have to try it both ways.....
10-18-2011, 09:01 AM
I posted this on the Official Pimping thread. but I think it would belong here also.
Is there any chance the first page of the SCTE thread can have all applicable ESCs and Motors readded? I guess I am part Tekin cheeleader, Castle Crackhead, Fuze Follower and potential Viper A$$hole, so I like to know what works and what doesn't, I don't care which company makes it.
I guess it just seems like too much argueing, considering these really are only toy cars.
Is there any chance the first page of the SCTE thread can have all applicable ESCs and Motors readded? I guess I am part Tekin cheeleader, Castle Crackhead, Fuze Follower and potential Viper A$$hole, so I like to know what works and what doesn't, I don't care which company makes it.
I guess it just seems like too much argueing, considering these really are only toy cars.
10-18-2011, 09:03 AM
10-18-2011, 09:04 AM
10-18-2011, 09:09 AM
Drilling the bleeder hole helped a lot when I built mine with no rebound, it made it really easy.