5Likes

SC10 4x4 Thread

Reply Subscribe

Thread Tools

Search this Thread

08-11-2011 | 06:17 AM

#6061

special_k

Tech Adept

Joined: Jul 2011

Posts: 203

From: Virginia

Quote:

Originally Posted by PanicRev

Emulsion build setup. Dont skip the last part where you work the shock and then puill the bleed screw back out. Work it hard for maybe 40 sec to a minute before the last bleed.

http://www.teamassociated.com/multim...4_Shock_Build/

Just wanted to say is ty very much that helped out great

got 2 races this w/e so we will c how these shocks work this way

08-11-2011 | 06:21 AM

#6062

toobad4u

Tech Fanatic

iTrader: (93)

Joined: Mar 2009

Posts: 991

In case someone is looking for one of these. I have a NEW one still sealed in the box. $250 shipped.

Thanks,
Stephen

08-11-2011 | 06:29 AM

#6063

barry1me

Tech Regular

iTrader: (9)

Joined: Jul 2011

Posts: 396

From: SE MI

Quote:

Originally Posted by T-BirdJunkie

ThunderbirdJunkie is in the midst of stripping his 4w down and noticed his rear arms are bowed in the same manner that the fronts are doing it. Anybody else notice this?

I noticed one of my rear a arms yesterday was a bit sagged out.

08-11-2011 | 07:23 AM

#6064

driver5150

Tech Adept

iTrader: (19)

Joined: Mar 2011

Posts: 161

Quote:

Originally Posted by cadillac

blueglowboy is right....check the wheel pins. i had the same thing happen to me before i even ran the truck for the first time. i suggest either picking up the tekno aluminum hexes or the ft hexes. problem solved.

Installed ft hexes last night and solved my problem! Thanks to all that responded. My stock plastic hexes were binding against the hubs. Also installed 15/62 and the tekin sc4x 5.5 came alive. For those having trouble get the ft hexes for sure!
Thanks

08-11-2011 | 07:34 AM

#6065

Artikbot

Tech Regular

Joined: Apr 2011

Posts: 323

From: Catalunya, Spain

Quote:

Originally Posted by barry1me

I noticed one of my rear a arms yesterday was a bit sagged out.

Here's hope that the FT version will carry composite arms. Not cool to have them bowing.

Edit: With the possiblity of them bending the CVAs.

08-11-2011 | 07:43 AM

#6066

Rick Hohwart

Tech Elite

Joined: Sep 2003

Posts: 4,004

Quote:

Originally Posted by T-BirdJunkie

No rear upper shock location, either.

Rick, any plans on releasing a .5* or 1* rear hub or different toe blocks for the 4w SC10?

The upper shock position should be #2. I am not aware of any plans for different hubs or toe blocks but this does not mean that they won't happen.

08-11-2011 | 08:30 AM

#6067

barry1me

Tech Regular

iTrader: (9)

Joined: Jul 2011

Posts: 396

From: SE MI

Quote:

Originally Posted by Artikbot

Here's hope that the FT version will carry composite arms. Not cool to have them bowing.

Edit: With the possiblity of them bending the CVAs.

ya no kidding....I wonder if this is why I have bent like 5 dog bones on the front....maybe front a arms are flexing to much also

08-11-2011 | 09:46 AM

#6068

evilllempire

Tech Adept

Joined: Jun 2011

Posts: 113

From: New Jersey

I was looking at the Roar Nats entries and neither of the top AE drivers are entered in 4wd SC Mod? Is there a reason? Just wondering.....

08-11-2011 | 10:09 AM

#6069

Wild Cherry

Tech Legend

Joined: Aug 2001

Posts: 22,595

From: TRCR Modified Driver

Quote:

Originally Posted by evilllempire

I was looking at the Roar Nats entries and neither of the top AE drivers are entered in 4wd SC Mod? Is there a reason? Just wondering.....

You need to check the 4x4 heat list again ....

08-11-2011 | 10:30 AM

#6070

racer1812

Super Moderator

iTrader: (31)

Joined: Nov 2008

Posts: 15,743

From: RIP 'Chopper', 4/18/13 miss you bud:(

Neither of the Ryan's are listed Cherry, and those would be considered the "top" 2 AE drivers...

08-11-2011 | 11:07 AM

#6071

evilllempire

Tech Adept

Joined: Jun 2011

Posts: 113

From: New Jersey

Quote:

Originally Posted by racer1812

Neither of the Ryan's are listed Cherry, and those would be considered the "top" 2 AE drivers...

Yea....thats what i'm wondering. Tebo is racing 4 classes and if there was a Kyosho 4wd SC he might be doing that too. No reason why neither of the Ryans wouldn't be running the SC10 4x4 at the Nationals

08-11-2011 | 11:11 AM

#6072

Wild Cherry

Tech Legend

Joined: Aug 2001

Posts: 22,595

From: TRCR Modified Driver

Quote:

Originally Posted by racer1812

Neither of the Ryan's are listed Cherry, and those would be considered the "top" 2 AE drivers...

R U saying.....
there is
just two Ae Factory drivers ?

So U know , less then 10 that are actually Factory...

So it would be reasonable to consider any factory driver from Ae to be one of the best drivers in the whole world, not just Nats...

08-11-2011 | 11:52 AM

#6073

Cameron Kellogg

Tech Champion

iTrader: (45)

Joined: Nov 2007

Posts: 5,776

From: Idaho

Quote:

Originally Posted by evilllempire

Tebo has JP to help when he races the big races. Cav has his dad but I don't know if Mayfield has any one person that helps him. That makes a lot of difference when you are racing so many classes. It is almost impossible to drive every class that they make cars for now at some of these events.