I did ensure that the sensor wire was fully in both my tc spec v2. and motor. I just replaced the motor with the same motor and am still having the same problem. Im going to try replacing my sensor wire and go from there. All my solder connections look good. And my bullet connectors are in my battery firmly. I did loosen my belt a tad to reduce drag but problem is still there, it slmost sounds like my belt is skipping but its the motor. Maybe i will try loosening my slipper a bit to let it slip and the motor spool up.
Getting a little upset, kinda wishing i didnt start wondering away from my usual two classes, 2wd buggy and 4wd buggy

Hey man, check the instructions on both your speedo and motor and make sire the wires are going to The right places. I've NEVER had a cogging problem with an lrp motor or escape and they are all that I use.

I sence another round of suspensions! Keep it clean!

Haha, probably since I keep getting "infractions" and week long bans for other people bumping my threads... Has happens twice this month alone.

Hopefully it's not the speedo, but try the motor with a different speedo and see if it does the same thing. Obviously swap the sensor wire first, but it may be a bad sensor port on the speedo. And that would suck

If you keep getting infractions and week long bans...maybe ThunderbirdJunkie isn't the guy that should leave RCTech

I have read the front page and do not really understand the gearing for a 6.5 540 can motor useing 32 pitch stock spur gear. Can someone tell me were to start. Thanks

T-Bird is just having fun and is often helpful, we exhange info often... I don't we why people are getting ther panties in a bunch over the 3RD person issue. I think it is kinda funny.

turbowop is okay with t-bird junkie.

OT:



PLEASE get over it.

ON topic:

User Jonny Wachter posted this setup:

http://teamassociated.com/pdf/cars_a...ut_Wachter.pdf

What did the vent holes in the rear look like, cause there's a lot of holes to cut out back there!

hi folks,
new to trucks and just wondering where's the best place to buy from? picked the SC10 now just wondering who gives the best deals?
thanks,
bart

Thanks for the prompt reply

I know I'll have more noob questions

Eric

I like nitrohouse, fair prices and really quick shipping.

Did you even read my post dumb***...? God your stupid! "Mr I'm so importent so I talk about myself in the third person" if you could read and not think about yourself for a second you would see what I said they were from.

I cut the three upper triangles out of the rear and ream as many holes as I can fit into the little area under the front windshield, I can get pics if necessary

Pics would be nice thx u in advance