wow, i see what you mean. thats weird. are the turnbuckles on right, or broke? can you push down slowly on the truck and see where or what is causing the wheels to do that?

Look like the tie rods. It looks like it is cause they are not on top. They are behind the wheel that they pull the backs together and that forces the fronts out. How do I correct this?
Actually how is your maxx set up to this?

mine are the same way. i got rpm arms and bearing carriers up front, but stock in the rear. my tie rods are behind the wheels also. when i compress my suspension the wheels just go in at the top. but they dont move outwards like yours. could you make a video maybe of you compressing the suspension and watching the wheels?

i wonder if your tie rods are to short or need adjusted? its like when you compress your suspension the tie rods are pulling the wheels in at the rear of them.

That is what's happening. Can you take a pic of yours of both points that the tie rod attaches to. That way I can see what yours looks like exactly. Thanks.

sure. give me a few minutes.

ok, 2 of the pics are the front with my rpm arms and knuckles. and the other 2 are of the rear stock arms and knuckles. sorry kinda dirty,lol. i noticed you got the older knuckles. but still, your wheels shouldnt do that.

What you are experiencing is called bump steer. Try mounting the turnbuckle to bottom of the carrier instead of the top.

Wont doing that make it worse?

i was actually gong to say try that also. you can try it and see if it helps. just put the tie rod end on the lower part of the knuckle.

right on a thread i can get into. i have 2 tmaxxes one was originally a pro .15 that i converted to a 2.5r RRP steel spur gear hi tech steering servo wheelie bar and a few bodies the other is a stock pro .15

I seam to remember reading a thread somewhere that said the turnbuckles should be parallel with the arms, its worth a try.

Ooooooooo ok put on the under side! I got it now. I was thinking there was another place on the frame to put the tie rod on. Ok I can try that then I will post again.

lol, yeaaaaa. let us know if it helps.

so whats everyones favorite upgrades for the t maxx? mine is replace the steering servo with something like a hi tech the stock one is a joke