Go-Tech Engines Thread
Here's the new 808 11 Spec with the GXII and new body, just before the start of the heats for our clubs champs yesterday.
Track was wicked and sticky, so it was traction city
The GXII is just sick in these conditions. Heaps of power to pull the wheels up if you want, but so predictable. This motor is a real pleasure to drive in the buggy.
Did the rod and fitted a ceramic main the other day, so the HO is really haulin butt. Looking good for spot in the A if it all goes to plan tomorrow.
Track was wicked and sticky, so it was traction city

The GXII is just sick in these conditions. Heaps of power to pull the wheels up if you want, but so predictable. This motor is a real pleasure to drive in the buggy.
Did the rod and fitted a ceramic main the other day, so the HO is really haulin butt. Looking good for spot in the A if it all goes to plan tomorrow.
Shane,
Good Luck, give 'em their moneys worth.
My brother in-law is into firearms. He sent me this link.
You could tear Bin Ladin a new one, and to heck w/ political correctness.
http://www.politesociety.com/binlade...l10%5B1%5D.swf
It's a little silly, but fun for a while.
Moto
Good Luck, give 'em their moneys worth.
My brother in-law is into firearms. He sent me this link.
You could tear Bin Ladin a new one, and to heck w/ political correctness.
http://www.politesociety.com/binlade...l10%5B1%5D.swf
It's a little silly, but fun for a while.
Moto
Shane,
Good Luck, give 'em their moneys worth.
My brother in-law is into firearms. He sent me this link.
You could tear Bin Ladin a new one, and to heck w/ political correctness.
http://www.politesociety.com/binlade...l10%5B1%5D.swf
It's a little silly, but fun for a while.
Moto
Good Luck, give 'em their moneys worth.
My brother in-law is into firearms. He sent me this link.
You could tear Bin Ladin a new one, and to heck w/ political correctness.
http://www.politesociety.com/binlade...l10%5B1%5D.swf
It's a little silly, but fun for a while.
Moto
Hi guys, I need some help.
I can't find on the GO site the parts diagram for the part numbers.
I have on hand ATM;
Starter wheel #630011
Starter wheel pully set #630012
Starter wheel belt #630013
Starter switch and wire hardware #630015
Starter motor #630016
I assume the parts I need are #630014 ??? the other gears in the starter box ??? but want to be sure I'm correct.
I can't find on the GO site the parts diagram for the part numbers.
I have on hand ATM;
Starter wheel #630011
Starter wheel pully set #630012
Starter wheel belt #630013
Starter switch and wire hardware #630015
Starter motor #630016
I assume the parts I need are #630014 ??? the other gears in the starter box ??? but want to be sure I'm correct.
Hi guys, I need some help.
I can't find on the GO site the parts diagram for the part numbers.
I have on hand ATM;
Starter wheel #630011
Starter wheel pully set #630012
Starter wheel belt #630013
Starter switch and wire hardware #630015
Starter motor #630016
I assume the parts I need are #630014 ??? the other gears in the starter box ??? but want to be sure I'm correct.
I can't find on the GO site the parts diagram for the part numbers.
I have on hand ATM;
Starter wheel #630011
Starter wheel pully set #630012
Starter wheel belt #630013
Starter switch and wire hardware #630015
Starter motor #630016
I assume the parts I need are #630014 ??? the other gears in the starter box ??? but want to be sure I'm correct.
630014 - Starter battery mounting plate set
630017 - Starter end plates and handle (includes activating switch)
630018 - Starter chassis fixtures set
Alll the internal gears and pullies are included in part # 630012
Thanks Grizz, yes you are rite, I must be tired, I just had another look and the part I need IS in there, thanks again tho.
We have been flooded with enquiries about the Godzilla Race Spec .25 , now im back from OS we are getting ready to release some more .. Orders through MassiveMods 95572770 or RC Hobbies 95640822
Speak to Adam Frankish
Hi guys,
just wanna ask if anyone uses the 7 or 6.5 venturi? is it good or not? wanted to lower pit stop and conserve fuel. But afraid that power will be limited.
Thanks
just wanna ask if anyone uses the 7 or 6.5 venturi? is it good or not? wanted to lower pit stop and conserve fuel. But afraid that power will be limited.
Thanks
Here is a pic of my 808 11 Spec from the weekend.
GXII-5RHO, 6.5 restrictor, 25% PURE fuel, 053 pipe, Ascendancy 4 shoe with 4 x alloy shoes and gold 1.0 rate springs - as you can see with only one wheel on the ground out of the corner, there is no shortage of power running the 6.5 venturi
The Massive lives !!!! What's been happening mate ??
Answered your query re the 6.5 restrictor on the other thread yesterday.
Here is a pic of my 808 11 Spec from the weekend.
GXII-5RHO, 6.5 restrictor, 25% PURE fuel, 053 pipe, Ascendancy 4 shoe with 4 x alloy shoes and gold 1.0 rate springs - as you can see with only one wheel on the ground out of the corner, there is no shortage of power running the 6.5 venturi
Here is a pic of my 808 11 Spec from the weekend.
GXII-5RHO, 6.5 restrictor, 25% PURE fuel, 053 pipe, Ascendancy 4 shoe with 4 x alloy shoes and gold 1.0 rate springs - as you can see with only one wheel on the ground out of the corner, there is no shortage of power running the 6.5 venturi

Someone wanted some video of the racing last weekend on the home track. Here is a clip someone took of one of the early buggy heats on Saturday.
http://www.youtube.com/watch?v=Gvln5...el_video_title
http://www.youtube.com/watch?v=Gvln5...el_video_title



2Likes

