Community
Wiki Posts
Search
Like Tree2Likes

Go-Tech Engines Thread

Thread Tools
 
Search this Thread
 
Old 04-30-2011 | 03:07 AM
  #13756  
grizz1's Avatar
Tech Elite
 
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
Default

Here's the new 808 11 Spec with the GXII and new body, just before the start of the heats for our clubs champs yesterday.

Track was wicked and sticky, so it was traction city
The GXII is just sick in these conditions. Heaps of power to pull the wheels up if you want, but so predictable. This motor is a real pleasure to drive in the buggy.
Did the rod and fitted a ceramic main the other day, so the HO is really haulin butt. Looking good for spot in the A if it all goes to plan tomorrow.
Attached Thumbnails Go-Tech Engines Thread-11-spec-reduced.jpg   Go-Tech Engines Thread-11-spec-reduced.jpg  
grizz1 is offline  
Old 04-30-2011 | 05:20 AM
  #13757  
motomatt's Avatar
Tech Master
iTrader: (12)
 
Joined: Mar 2007
Posts: 1,283
From: WI
Default

Shane,
Good Luck, give 'em their moneys worth.
My brother in-law is into firearms. He sent me this link.
You could tear Bin Ladin a new one, and to heck w/ political correctness.
http://www.politesociety.com/binlade...l10%5B1%5D.swf
It's a little silly, but fun for a while.


Moto
motomatt is offline  
Old 04-30-2011 | 06:44 AM
  #13758  
bigmatt's Avatar
Tech Master
iTrader: (16)
 
Joined: Mar 2008
Posts: 1,485
Default

Originally Posted by motomatt
Shane,
Good Luck, give 'em their moneys worth.
My brother in-law is into firearms. He sent me this link.
You could tear Bin Ladin a new one, and to heck w/ political correctness.
http://www.politesociety.com/binlade...l10%5B1%5D.swf
It's a little silly, but fun for a while.


Moto
Moto, pm me for price on new style hsn and new head and button
bigmatt is offline  
Old 04-30-2011 | 08:25 AM
  #13759  
LOSI123's Avatar
Tech Elite
iTrader: (63)
 
Joined: Jan 2007
Posts: 2,610
From: Gold Coast-Australia
Default

Where can i get a GXII HO Engine from in Australia?
LOSI123 is offline  
Old 04-30-2011 | 08:35 AM
  #13760  
Flanno's Avatar
Tech Master
iTrader: (2)
 
Joined: Jun 2009
Posts: 1,566
From: Sydney
Default

Originally Posted by LOSI123
Where can i get a GXII HO Engine from in Australia?
MassiveMods/Rc Hobbies, tell em Flanno sent ya
Flanno is offline  
Old 05-01-2011 | 02:02 AM
  #13761  
Flanno's Avatar
Tech Master
iTrader: (2)
 
Joined: Jun 2009
Posts: 1,566
From: Sydney
Default

Hi guys, I need some help.

I can't find on the GO site the parts diagram for the part numbers.

I have on hand ATM;

Starter wheel #630011
Starter wheel pully set #630012
Starter wheel belt #630013

Starter switch and wire hardware #630015
Starter motor #630016

I assume the parts I need are #630014 ??? the other gears in the starter box ??? but want to be sure I'm correct.
Flanno is offline  
Old 05-01-2011 | 02:15 AM
  #13762  
grizz1's Avatar
Tech Elite
 
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
Default

Originally Posted by Flanno
Hi guys, I need some help.

I can't find on the GO site the parts diagram for the part numbers.

I have on hand ATM;

Starter wheel #630011
Starter wheel pully set #630012
Starter wheel belt #630013

Starter switch and wire hardware #630015
Starter motor #630016

I assume the parts I need are #630014 ??? the other gears in the starter box ??? but want to be sure I'm correct.
Part # you have missing Flanno are as follows -

630014 - Starter battery mounting plate set
630017 - Starter end plates and handle (includes activating switch)
630018 - Starter chassis fixtures set

Alll the internal gears and pullies are included in part # 630012

grizz1 is offline  
Old 05-01-2011 | 03:49 AM
  #13763  
Flanno's Avatar
Tech Master
iTrader: (2)
 
Joined: Jun 2009
Posts: 1,566
From: Sydney
Default

Originally Posted by grizz1
Part # you have missing Flanno are as follows -

630014 - Starter battery mounting plate set
630017 - Starter end plates and handle (includes activating switch)
630018 - Starter chassis fixtures set

Alll the internal gears and pullies are included in part # 630012
Thanks Grizz, yes you are rite, I must be tired, I just had another look and the part I need IS in there, thanks again tho.
Flanno is offline  
Old 05-02-2011 | 10:00 PM
  #13764  
MassiveMods's Avatar
Thread Starter
Tech Master
 
Joined: Jan 2006
Posts: 1,977
From: Sydney
Default

Originally Posted by Flanno
yep, jumbo cocanuts

and surpisingly, gets 7 min 25sec and just under 1/2 a tank still left
We call them Big Kahoonas ... lol

We have been flooded with enquiries about the Godzilla Race Spec .25 , now im back from OS we are getting ready to release some more .. Orders through MassiveMods 95572770 or RC Hobbies 95640822

Speak to Adam Frankish

MassiveMods is offline  
Old 05-02-2011 | 11:09 PM
  #13765  
Flanno's Avatar
Tech Master
iTrader: (2)
 
Joined: Jun 2009
Posts: 1,566
From: Sydney
Default

not bad going, concidering I'v only run it twice

Last edited by Flanno; 05-03-2011 at 02:44 AM.
Flanno is offline  
Old 05-03-2011 | 01:10 AM
  #13766  
jnc011994's Avatar
Tech Regular
iTrader: (15)
 
Joined: Dec 2007
Posts: 432
From: Philippiens
Default GO GXII with 7 or 6.5 mm venturi

Hi guys,

just wanna ask if anyone uses the 7 or 6.5 venturi? is it good or not? wanted to lower pit stop and conserve fuel. But afraid that power will be limited.

Thanks
jnc011994 is offline  
Old 05-03-2011 | 01:57 AM
  #13767  
grizz1's Avatar
Tech Elite
 
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
Default

Originally Posted by jnc011994
Hi guys,

just wanna ask if anyone uses the 7 or 6.5 venturi? is it good or not? wanted to lower pit stop and conserve fuel. But afraid that power will be limited.

Thanks
Answered your query re the 6.5 restrictor on the other thread yesterday.
Here is a pic of my 808 11 Spec from the weekend.
GXII-5RHO, 6.5 restrictor, 25% PURE fuel, 053 pipe, Ascendancy 4 shoe with 4 x alloy shoes and gold 1.0 rate springs - as you can see with only one wheel on the ground out of the corner, there is no shortage of power running the 6.5 venturi
Attached Thumbnails Go-Tech Engines Thread-808-reduced.jpg  
grizz1 is offline  
Old 05-03-2011 | 01:59 AM
  #13768  
grizz1's Avatar
Tech Elite
 
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
Default

Originally Posted by MassiveMods
We call them Big Kahoonas ... lol

We have been flooded with enquiries about the Godzilla Race Spec .25 , now im back from OS we are getting ready to release some more .. Orders through MassiveMods 95572770 or RC Hobbies 95640822

Speak to Adam Frankish

The Massive lives !!!! What's been happening mate ??
grizz1 is offline  
Old 05-03-2011 | 02:54 AM
  #13769  
jnc011994's Avatar
Tech Regular
iTrader: (15)
 
Joined: Dec 2007
Posts: 432
From: Philippiens
Default

Originally Posted by grizz1
Answered your query re the 6.5 restrictor on the other thread yesterday.
Here is a pic of my 808 11 Spec from the weekend.
GXII-5RHO, 6.5 restrictor, 25% PURE fuel, 053 pipe, Ascendancy 4 shoe with 4 x alloy shoes and gold 1.0 rate springs - as you can see with only one wheel on the ground out of the corner, there is no shortage of power running the 6.5 venturi
thanks griz..
jnc011994 is offline  
Old 05-03-2011 | 03:01 AM
  #13770  
grizz1's Avatar
Tech Elite
 
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
Default

Someone wanted some video of the racing last weekend on the home track. Here is a clip someone took of one of the early buggy heats on Saturday.

http://www.youtube.com/watch?v=Gvln5...el_video_title
grizz1 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.