3LikesRcRenew.com engine resizing and epoxy crank re-filling
12-19-2010 | 01:59 PM
#346
We do offer "race prepped" Werks engines. They will be added to the website shortly.
"race prepped" engines are disassembled and cleaned to insure no debris from the manufacturing process happens to be present. Internal bearings and components are lubed with a "pre-Run oil to help ease initial startup and then Heat cycled and broke in on a break in bench with 500cc of fuel with a break in oil additive added for extra protection. Engines are broke in using the heat cycle method on tank 1 and the rest of the break in is done using a computer controlled process gently varying engine rpms. Followed by complete cool down before the next Tank. Engines are then cleaned and lubed with after run lubricant.
If anyone is interested just Contact us, as we will be adding thes engines to the site soon.
Thanks,
Lance
RcRenew
"race prepped" engines are disassembled and cleaned to insure no debris from the manufacturing process happens to be present. Internal bearings and components are lubed with a "pre-Run oil to help ease initial startup and then Heat cycled and broke in on a break in bench with 500cc of fuel with a break in oil additive added for extra protection. Engines are broke in using the heat cycle method on tank 1 and the rest of the break in is done using a computer controlled process gently varying engine rpms. Followed by complete cool down before the next Tank. Engines are then cleaned and lubed with after run lubricant.
If anyone is interested just Contact us, as we will be adding thes engines to the site soon.
Thanks,
Lance
RcRenew
....RcRenew.com is moving on up!
12-21-2010 | 12:47 PM
#350
We Will be open regular hours all week, and also next week so the holiday will not delay return of your items. BUt I know the postal service will be a bit slower...lol....Thanks guys!
Thanks,
Lance
RcRenew
Thanks,
Lance
RcRenew
12-22-2010 | 02:31 PM
#351
Joe,Mike Smitty, received your piston sleeve sets this morning, They were serviced and shipped back out today. You guys should hopefully have them back by friday.. Tracking was E-Mailed to you.
Thanks guys Happy Holidays,
Lance
RcRenew
Thanks guys Happy Holidays,
Lance
RcRenew
12-22-2010 | 09:25 PM
#353
Thanks Jaz....Hope you,your friends and family have a great and safe Christmas!
RcRenew would Like to thank all of our Customers, friends,Fellow Racers and Suppliers. It has been a good year for some and a very tough year for others. In this country wide economic recession. Our family has been impacted by it and many friends and fellow racers. Chin up and have faith that things will get better. Our hearts go out to all the families and individuals struggling this holiday season. We wish everyone a safe, and wonderful Christmas and holiday season!
Merry Christmas everyone!
From the RcRenew Family,
Lance Kerri Devon and Jenna
RcRenew would Like to thank all of our Customers, friends,Fellow Racers and Suppliers. It has been a good year for some and a very tough year for others. In this country wide economic recession. Our family has been impacted by it and many friends and fellow racers. Chin up and have faith that things will get better. Our hearts go out to all the families and individuals struggling this holiday season. We wish everyone a safe, and wonderful Christmas and holiday season!
Merry Christmas everyone!
From the RcRenew Family,
Lance Kerri Devon and Jenna
12-23-2010 | 03:23 PM
#356
See what all these rainy days do.........
Heres a B5 crank I Drilled and getting ready to Fill.
Pic on hte right is a before pic.......
Lance,
RcRenew
Heres a B5 crank I Drilled and getting ready to Fill.
Pic on hte right is a before pic.......
Lance,
RcRenew
Last edited by Rcrenew; 12-23-2010 at 06:57 PM. Reason: added pic
12-24-2010 | 03:36 PM
#359
Less rotating mass in the crankshaft, this reduced the weight by 10%. so it will rev/ spool up quicker. I Was just messing around in the shop and thought I would do it. See what happens when it rains for a week straight! Us So-cal people start doing crazy things....lol
Thanks,
Lance
RcRenew
Thanks,
Lance
RcRenew
12-26-2010 | 11:49 PM
#360
Delane74- your GRP shipped out friday. I pm'd you tracking for it. It had a pretty good scratch on the piston. But we cleaned it up and got it to seal very well.Rsized the sleeve in 4 places to get the seal uniform and back to where it should be..... The rod has some play but is still usable for this resize. Afetr it wears out this time it will need a rod. I pm'd you all the details.
Thanks again,
Lance
RcRenew
Thanks again,
Lance
RcRenew