RC10B4.1 FT/WC
10-27-2010 | 10:03 AM
#707
Tech Master
Joined: Feb 2006
Posts: 1,480
From: Las Vegas, NV
You are incorrect. Look at your ae bottle. The cst # is on it. Losi oil uses that number with a decimal place. So:
Assoc 25 is losi 27.5
Assoc 30 is losi 35
Assoc 35 is losi 42.5
Assoc numbers grow exponentially out of wack the higher you go.
50 wt assoc is like 62.5 or something and 60 wt is like 80 or so. Just check the ae bottle. The number is on it above the assoc wt #
Assoc 25 is losi 27.5
Assoc 30 is losi 35
Assoc 35 is losi 42.5
Assoc numbers grow exponentially out of wack the higher you go.
50 wt assoc is like 62.5 or something and 60 wt is like 80 or so. Just check the ae bottle. The number is on it above the assoc wt #
Losi WT Associated WT
10 7.5
15 12.5
20 17.5
25 22.5
27.5 25
30 27.5
32.5 30
35 32.5
37.5 35
40 37.5
As for Losi using the decimal place for CST, where did that come from?
10-27-2010 | 10:11 AM
#708
Actually, a team driver told me that. I wont say which team now that I read your sig 
but I will, of course, double check my info now. I always thought it was per your team chart as well. Hmmmmm.
Thanks.
but I will, of course, double check my info now. I always thought it was per your team chart as well. Hmmmmm.Thanks.
Last edited by mjk1210; 10-27-2010 at 10:29 AM.
10-27-2010 | 10:23 AM
#709
Tech Regular
Joined: Sep 2009
Posts: 353
I am just about done with my T4.1FT and wondering what others are using for gearing. I will be running a 13.5T brushless set up on a fairly short technical track with good grip. I did do a search on this thread but could not find an answer. Thanks.
10-27-2010 | 10:40 AM
#711
10-27-2010 | 03:50 PM
#713
I just got a 13.5 put in on monday and switched to 24/81 on my t4.1
10-27-2010 | 04:00 PM
#715
Tech Addict
Joined: Jan 2005
Posts: 528
10-27-2010 | 07:46 PM
#716
Tech Rookie
iTrader: (1)
Joined: Oct 2010
Posts: 15
From: TN
setup
I just bought a B4 and wonder if someone can point me toward a really good setup for packed clay, rough, sometimes dusty, low/med traction. I have searched around and have not had much luck.
I havent seen much mention of the swaybar....is it necessary or needed?
Thanks!
I havent seen much mention of the swaybar....is it necessary or needed?
Thanks!
10-27-2010 | 07:56 PM
#717
I just bought a B4 and wonder if someone can point me toward a really good setup for packed clay, rough, sometimes dusty, low/med traction. I have searched around and have not had much luck.
I havent seen much mention of the swaybar....is it necessary or needed?
Thanks!
I havent seen much mention of the swaybar....is it necessary or needed?
Thanks!
http://www.teamassociated.com/setupsheets/RC10B4.1/
10-27-2010 | 08:33 PM
#719
The B has what would be hole place in between the A holes. If you hold them up to each other you might see it better. I think A is like the stock hub holes.
10-27-2010 | 08:35 PM
#720