18LikesXray NT1
05-19-2010 | 11:32 PM
#5296
hi i saw a post by musti72 on another post saying that the nt1 multiflex engine mount doesn't really work that well and instead most racers have replaced it with the original one is it real? i have the multiflex one installed on my nt1 but i didn't test the stock one, what would be a better option regular one, or the multiflex?
05-19-2010 | 11:34 PM
#5297
FYI: Not sure if anyone else notices this or said somting but the large belt (the 390mm one) I believe is the same as a Losi JRX-S Pro but for around $5 less.
(I was trying to see if i could find belts that were less expensive for my JRX-S and thought u guys with the NT1's might save a little $$)
Losi part # is LOSA3302
3mm x 390mm belt, Grey in color.
(I was trying to see if i could find belts that were less expensive for my JRX-S and thought u guys with the NT1's might save a little $$)
Losi part # is LOSA3302
3mm x 390mm belt, Grey in color.
05-20-2010 | 09:39 AM
#5298
Tech Addict
iTrader: (3)
Joined: Nov 2008
Posts: 600
I honestly liked the V2 Hardened steel pivot balls the best, never bent one or broke one before. In that area of the car, I'd rather have the durability than be concerned about weight savings. And to tell whether they're bent or not I guess you can just rotate them using your wrench to see if it spins true. I'd do it while the car is on the set up gauges... then again you could always just take them off to look at them.
05-20-2010 | 12:45 PM
#5299
Tech Fanatic
Joined: Sep 2006
Posts: 887
From: NY, New York
where's everybody at??? lol
05-25-2010 | 03:28 PM
#5304
Tech Fanatic
Joined: Sep 2006
Posts: 887
From: NY, New York
1D works better on high bite tracks and gives the car more mid and exit steering. on low bite you'd most likely notice a push with them, which is where the standards work well at. The 1D's also make the car less sensitive upon corner entry.
05-25-2010 | 07:49 PM
#5305
you're 10ths of a second off 20 laps at BD and you want to change steering blocks? Greedy sausage head.
05-26-2010 | 11:43 AM
#5307
Tech Master
Joined: Oct 2005
Posts: 1,440
From: 42
05-26-2010 | 01:21 PM
#5308
AVAILABLE!
Xceed composite gear-sets for NT1 geardiffs.
Available: http://kamikazercracing.com/proddeta...prod=XCE108248
05-26-2010 | 06:03 PM
#5310
. No, for real I expected the first several races to be rained out and I am busy with work, starting a new business and engineering school. Any one of which is enough of a pain in the ass. RC has taken a back seat to it all. and not that it matters that I haven't shown up, like 2 of the three races got rained out right?