22LikesHoustons Engine Service H.E.S.
08-08-2009 | 09:57 AM
#1233
Houstons Engine Service Novarossi Plus 4 takes 12yr old Cade Whitenton to the TQ and 1st place win in Intermediate 1/8th Buggy and TQ and 1st Place win in Intermediate Arena Truck at the Region 9 ROAR Offroad Fuel Championships August 1st.
Thanks for the Plus 4 in the buggy Monty. The motor is off the hook and still not broke in yet. That is two in a row with SMOOTH NOVAROSSI POWER!!!!!
Jon
Thanks for the Plus 4 in the buggy Monty. The motor is off the hook and still not broke in yet. That is two in a row with SMOOTH NOVAROSSI POWER!!!!!
Jon
dont forget to leave a testimonial on www.houstonsengineservice.com
houston
08-08-2009 | 01:22 PM
#1234
Tech Adept
iTrader: (9)
Joined: Jul 2009
Posts: 139
From: Oneonta,AL
novarossi plus21-7fms
I got the 21-7fms that I only have 3/4 of a gallon of fuel through it.I went to the track for the first time to finish break-in and have noticed oily dirt collecting around the rubber boot on the carb and at the base of the carb.It's only a small amount and just need to know if it's anything to worry about.
08-08-2009 | 04:03 PM
#1236
I got the 21-7fms that I only have 3/4 of a gallon of fuel through it.I went to the track for the first time to finish break-in and have noticed oily dirt collecting around the rubber boot on the carb and at the base of the carb.It's only a small amount and just need to know if it's anything to worry about.
if its from me it is probably just the lubrication that i use to assemble the engine . it will collect a little dust
08-09-2009 | 07:41 AM
#1240
Tech Regular
iTrader: (14)
Joined: Jul 2006
Posts: 302
Monty, what do you think of the Novarossi N21BF Limited Edition .21 Off Road 3 Port motor???
__________________
I wanna up that question with.....What do you think about it in a truggy?
I can answer that, I have one of monty's, the motor just rips, it will pull a truggy around pretty good, lacks a little on the top, but a great mill for the $$.
jlo
__________________
I wanna up that question with.....What do you think about it in a truggy?
I can answer that, I have one of monty's, the motor just rips, it will pull a truggy around pretty good, lacks a little on the top, but a great mill for the $$.
jlo
08-09-2009 | 08:09 AM
#1241
Tech Champion
Joined: Apr 2008
Posts: 6,031
From: Columbus, OH
Speaking of flat head screws and Hudy tools.....what is the best Hudy tip for the Novarossi screws on the head and back plate?
I have a dynamite tool set, and I'm replacing my tips on my most used wrenches with Hudy tips.
any of these??
http://www.amainhobbies.com/product_...c-40mm-x-150mm
http://www.amainhobbies.com/product_...c-30mm-x-120mm
http://www.amainhobbies.com/product_...c-50mm-x-150mm
thanks
I have a dynamite tool set, and I'm replacing my tips on my most used wrenches with Hudy tips.
any of these??
http://www.amainhobbies.com/product_...c-40mm-x-150mm
http://www.amainhobbies.com/product_...c-30mm-x-120mm
http://www.amainhobbies.com/product_...c-50mm-x-150mm
thanks
08-09-2009 | 08:22 AM
#1242
I just ordered one last week for my D8T and decided to do a search to see how it would run in my D8T and came up with this thread. I know that it has great low end and somewhat falls off on top, I have a Dynamite 086 pipe that I'm going to use with it hopefully that helps. If I sent it to you for "service" what could I expect when I get it back, better top end?
08-09-2009 | 10:38 AM
#1243
Tech Apprentice
Joined: Mar 2009
Posts: 98
Monty, what do you think of the Novarossi N21BF Limited Edition .21 Off Road 3 Port motor???
__________________
I wanna up that question with.....What do you think about it in a truggy?
I can answer that, I have one of monty's, the motor just rips, it will pull a truggy around pretty good, lacks a little on the top, but a great mill for the $$.
jlo
__________________
I wanna up that question with.....What do you think about it in a truggy?
I can answer that, I have one of monty's, the motor just rips, it will pull a truggy around pretty good, lacks a little on the top, but a great mill for the $$.
jlo
08-09-2009 | 11:16 AM
#1244
Me too. I just found this thread and didnt realize you sold the motors already modded. I just ordered one last week for my D8T and decided to do a search to see how it would run in my D8T and came up with this thread. I know that it has great low end and somewhat falls off on top, I have a Dynamite 086 pipe that I'm going to use with it hopefully that helps. If I sent it to you for "service" what could I expect when I get it back, better top end?
I just ordered one last week for my D8T and decided to do a search to see how it would run in my D8T and came up with this thread. I know that it has great low end and somewhat falls off on top, I have a Dynamite 086 pipe that I'm going to use with it hopefully that helps. If I sent it to you for "service" what could I expect when I get it back, better top end?
08-09-2009 | 11:17 AM
#1245
the mods get a little tweaked on here .