You racing this weekend? The Tamiya crew will be out in full force.

Does anyone know where do get a spool for a 415 msx? I would prefer a Tamiya part to remain TCS legal. Will the unit for the 416 fit in the 415? I've been looking all over online line and haven't been able to find anything.

i use this guy

he is a bit expensave compared to rcmart of rc market but hos stuff usually comes in 3 days

http://www.vellrip.com/store/home.asp

found them i stock , this is what i ordered for mine at christmas

http://www.vellrip.com/store/product...asp?p=337&c=78
http://www.vellrip.com/store/product...asp?p=742&c=78
http://www.vellrip.com/store/product...asp?p=744&c=78

back been bothering me but I am trying/wanting to race real bad! I miss all my non nitro buddies

Just find you a turn marshall and you're set

Yeah thats right , fine tune for your track though 26mm for a tight track
and 25mm for sweeping longer track

3 hole pistons and 50wt front 3 hole and 35wt rear

try white fronts and blue rears and tyre tweak rears only

also keep your ride height neutral say 5mm front rear.

H T helps

Anybody know or have a link to a website where I can get a LiPo weighted plate.

Thanks!

Stormer has THESE but they're a little pricey...

A bit of a cheek, I have a 415 MRE(ceramic+ Sq) forsale ... but based in UK £100 + shipping good condition Also spares(for extra).. pm me for pixs etc

That price is crazy high. Nexus racing sells the same thing for $27...

http://www.nexusracing.com/product_i...oducts_id=2584



If I was gonna spend $50 on a tray for my 415, I would rather buy something nice like this that moves the lipo out from under the bulkhead:

http://www.bittydesign.net/PortaLipoTAMIYA-TRF-ING.htm

Thanks Guys!......Awesome stuff!

I thought I share with you guy's what I made
I could'nt find any diff covers for my cars, everybody was out of stock. So I decided to make my own using the lexan leftover from cutting out the wheel opennings on the bodies. Withe the 416 half the diff balls are exposed so I needed to do somthing. From the Pics I used clear on the 416, it now serves as an inspection window too. On the 415 I used white. You basically just use the pulley as a template and cut with lexan scissors, next I used the body reamer for the center hole. And bam your DIY diff covers
415

416

and the body I used when I cut the wheel openings

since I built the cars I have never rebuilt the diffs even after 6 races and practicing everyday on some light dust asphalt

i like the dust covers

but i want you to paint me a body shell

did you use masks or stickers ??

or was it airbrushed ??

nice cover idea,

I just use old stickers and cut them out like a donut and they 'stick' to the diff gear, I put some anti wear grease where it touches the outdrive and nothing get's through

i didn't paint the bodie, Franksbodies painted it for me. He airbrushed it too.