What would you guys suggest as most important for protecting the NT1 in a crash yet still keeping it fully race worthy

Hard Foam Bumper
or
Wide Bumper

??

Hard Foam Bumper.

Hey, that combo is mine! Richie if you read this don't sell!! I'll be getting it as soon as I'm back from vacation!!

Wide Bumper or use Front CVD

Wide bumper, hard foam bumper, front CVD, hard chassis, multi diff, etc......put all together and let's see what happen

Hey Sebastian (AddictedToRacin)

Congrats on the 2nd place finish at Augsburg. Have you made any changes to your car at all? Just wondering if you bought any upgrades.

Thanks

BTW... The link to your blog web page in your profile is not good.

NT1 Domination at German Qualification
http://www.teamxray.com/teamxray/new...0Qualification

3 Racing
Alum. bumper post & Titanium shaft

We drive the car box-stock except another gearing and the front cvd's. Also we tried the adjustable rear anti-rollbar. Augsburg is very bumpy and you have some corners with height difference so it was very good with a hard anti-rollbar to prevent an unstable car.
In general the adjustable one is too hard, but I changed front anti-rollbar from 0° to disconnected and the rear-antirollbar in a nearly flat position.

Thanks for the info. Very interesting about the adjustable anti-rollbar. Maybe blades from another brand would be more suitable.

This is what I was talking about. The car seems too twitch with the blades on it... The blade kit would work very well for a tight technical track, but for high speed sweeping tracks, no.

Well, we will now try to grind the blades to .9 or .8mm and then try again. With the Serpent it worked great.

Hallo Sebastian,

Glückwunsch, tolles ergebniss

I checked your set-sheet. U cut your tires with (left-right) 2 mm split. How was it after final. can you give us some diameters after race.

I saw your front track width is very narow. how was you off power steering. Did you get more off power steering with this setting
thnx

the blades I had were MTX blades...just for clarification.

Hi there fellas! new to this forum and RC onroad cars but have been a long time offroad nitro driver. Anyway I have recently purchased an NT1 and was just wondering what engine I should put in it thats not too radical and would let me learn the whole dynamics of the car? Any recommendations would be fabulous!


cheers,

john dewey

Thats a good question: I wish a lot of new drivers to nitro on-road would think this way, instead of trying to get the fastest engine out there.

A club down here in Florida is starting a class with the intention to get new drivers out there with an engine that isn't a rocket ship, but a smooth running, slower "SPEC" class(I guess you could call it that) that is going to use the OS .12 TG. This engine is a good power engine that will last a long time and take the abuse and keep on giving. Not only that, a runtime more than 5 min is very likely, maybe even 10 on a tank! This class will bring new racers to work on setting up the car to handle better and get more out of the car overall.

Answer: a good choice would be an engine like the OS TG. But if you are looking for an engine that is cabable of winning races, go with any of the Novarossi engines, like the NS12.