Tekno RC EB48.4 Thread
#1711
Tech Adept
Joined: Jun 2018
Posts: 181
#1712
#1714
Tech Adept
Joined: Jun 2018
Posts: 181
Depends on the layout, if no tight corner 18t should do it. Other than that is 17t. Spur, theres only 44t.
#1716
#1717
Tech Apprentice
Joined: Dec 2017
Posts: 96
Noticed when car was on stand that when i turn then wheels left, the front of the right tires runs on the shock spring. When turning the other way, the left wheel does not contact the ledt spring. Epa’s seem to be fine and same in both sides. When car is at ride height no issue. Checked hinge pin and it is fine. Any thoughts?
#1720
Joined: Mar 2011
Posts: 6,410
From: Austin,TX
#1723
Joined: Mar 2011
Posts: 6,410
From: Austin,TX
TEKNO offers full support of all their legacy vehicles here:
https://www.teknorc.com/product-vehicle/eb48_4/
Keep in mind the .4 is 2 generations old, perfectly fine for a sportsman driver just starting out, but if you want to be competitive then the 2.1 will be worth the upgrade.
#1725
TEKNO offers full support of all their legacy vehicles here:
https://www.teknorc.com/product-vehicle/eb48_4/
Keep in mind the .4 is 2 generations old, perfectly fine for a sportsman driver just starting out, but if you want to be competitive then the 2.1 will be worth the upgrade.
https://www.teknorc.com/product-vehicle/eb48_4/
Keep in mind the .4 is 2 generations old, perfectly fine for a sportsman driver just starting out, but if you want to be competitive then the 2.1 will be worth the upgrade.





311Likes