2Likes

Tekno RC EB48 Thread

Reply Subscribe

Thread Tools

Search this Thread

05-07-2017 | 07:34 PM

#15106

Matthew_Armeni

Thread Starter

Tech Master

iTrader: (31)

Joined: Nov 2007

Posts: 1,900

From: Temecula

Quote:

Originally Posted by HeavyD99

I added the same update to my SL and I am wondering if was a bad idea because with the buggy off the ground it results in some major bump steer, the front tires get some serious toe out at full droop. I haven't had the chance to run it yet but I will report back with my findings in a few week once I have done a back to back comparison. I'm not 100% sure the newer .4 steering set up was intended for the SL.

You can adjust the bumpsteer by flipping the offset steering ball ends and adding or removing washers under/over those ends. There's enough adjustment to get bump in, zero bump, or bump out.
Also be sure that you shorten your steering links approximately 2-3mm per side so that you have enough adjustment to achieve the correct static toe.

HeavyD99 likes this.

11-05-2017 | 02:47 AM

#15107

Kalvo

Tech Rookie

Joined: Nov 2017

Posts: 10

New eb48

Good morning everyone,
Here is one that is considering buying this car and wanted to know what parts would be good to have spare parts and which springs are usually used, those that come in the box?

11-06-2017 | 06:15 AM

#15108

ezlight

Tech Master

Joined: Oct 2014

Posts: 1,167

From: Maine

Quote:

Originally Posted by Kalvo

Good morning everyone,
Here is one that is considering buying this car and wanted to know what parts would be good to have spare parts and which springs are usually used, those that come in the box?

I don't think your looking at the EB48, if your buying new, then look at the EB48.4 thread. But to answer your question on spares, Hinge pins, shock shafts, and spur gears. 2 sets of each in your pit box. that will get you through most issues.

11-26-2017 | 07:37 PM

#15109

1/8 IC Fan

Tech Champion

iTrader: (102)

Joined: Jan 2012

Posts: 6,646

From: Holland, MI

Does the EB48.2 accept the .4 front towers?

11-27-2017 | 12:05 AM

#15110

werner sline

Tech Elite

Joined: Dec 2012

Posts: 2,996

Quote:

Originally Posted by 1/8 IC Fan

Does the EB48.2 accept the .4 front towers?

i would start by compairing the parts number of the diff box. that would be a first hint. then compair some pictures. i mounted a .2 front shocktower on my .3