Have you brought your issues to Muchmore directly? It seems to me that your problems are not common nor shared anywhere else. Perhaps Muchmore maybe able to assist you in providing the right settings. The fleta pro certainly has many more settings than any other esc I've used but it's also the smoothest! Something strange is happening with yours!

i have run my fleta pro with a 17.5 muchmore (blinky) and a 13.5 reedy sonic (boosted) and thought it was pretty good tbh, so what are your settings that you are running? say with the 13.5's that you have tried??

I've tried different configuration in settings without any solutions.
I can't add anything else....

jang was recommending 8.3v battery voltage for modified racing, to eliminate extreme punch.

Hi,
I want to know if the bottom part of the Fleta Pro ESC is Aluminium or Plastic (like fleta euro)!
Thx for replying.

It's aluminum.

I know this is an onroad section.
But I'm using the fleta pro for 4wd mod buggy racing and I had used the fleta 4 before.

With the same Fleta ZX 6,5T and 7,5T motors the Fleta pro has just too much punch a low rpm... even on Powerlevel 1.
The only way to make it driveable, was gearing down... since it got even worse with a larger pinion (the ESC has more than enough power).

8.3V for racing... no sense....
It is an issue recognised from MM. Everyone suffer this must write to them in order to get a new firmware.

I wrote them 2 weeks ago... never got an answer.
For me the ESC is unsuable at the moment.

I have also emailed them before on other matters and have never had replies from both muchmore directly and their uk distributors. It puts you off buying the products and my money has now gone elsewhere to manufacturers who care for their customers!

Muchmore = Muchless customer services

Rant over....

Strange, I always get a good response from muchmore UK. They have been great in sorting out any questions, I've since bought another one as I really like the smoothness of the esc.

Agree....
It seems i'am not alone... Also i went nervous about the loss of time they caused so my advice is be heavy and don't stop press them with mails...

Is there new PRO v2 on the way?

We use the Pro in mod and pro stock. In mod we use Muchmore motors (5.5T, 5.0T, and 4.5T) and in pro stock a LRP X20 13.5T.

We have not had a single issue and regard the Muchmore Fleta Pro and motors as smooth and yet poweful.

We have tried LRP Flow and Orca VX 3 and earlier models.

The Fleta Pro is amazing. I run them in my off-road rigs with no issues. Not sure why people think it has to much punch. The thing is smooth as silk.