Muchmore fleta pro ESC
 

Anyone got one of these new releases? purchased 2 myself and when you have boosted on, turbo is fine but boost with a reedy motor sounds horrible and crunchy at low rpms..its nasty..wonder why that is..certainly isnt anything mechanical on the car, checked all that

Turns out the crunching noise at low rpm with boost is perfectly normal, its the motor, and can either be worse or better depending on motor, even worse with a corally lol :Z

I don't have the pro version but I have been running the Fleta 4 esc and Fleta motor for a few months and it works great boosted running mod.

http://i175.photobucket.com/albums/w...ps7202bf42.jpg

Difference between the 4 n pro is rather huge, i think for muchmores first ACTUAL ESC they made its fantastic

buttery smooth

And what's the difference? Is the software exchangeable? I bought a 4 few months ago and it' already outdated :flaming:

No the software is not exchangeable

its software is entirely proprietary to muchmore, no speedpassion flashing or anything, has drive frequency, brake frequency, etc etc

In my opinion the new pro is not a good job.
It is nasty, aggressive and the feeling is bad and this is true in all firmwares.
No chance to obtain a good result, i've tried different settings also in drive frequency.
But, it is strange that asian drivers loves it... maybe Mr.Jang preferred them to extend a reasonable firmrware....
I'm very disappointed...

Interesting as there were a lot of the fleta pro's at the TITC race in Bangkok and they were absolutely flying! Jang was there....

Ha! True but its the nature of the beast. Everything in life is the same these days. A product bought today is out of date tomorrow! :cry::rolleyes:

What motor you using it with, never had any issues with it being aggressive. I for one would of dumped the esc a long time ago if it was nasty and aggressive as i wouldnt be able to drive a car like that at all.

I no problems with mine at all. Maybe because I'm Asian. Are you running mod or stock?

I would check your motor, the big positive with the Fleta is that its very very smooth, have you checked your drive frequency?

Don't make misunderstandings, i'm not alone here with this issue and the problem is not Asia or Asians...
Tested with these motors: reedy 13.5, 5.0 4.5, trinity 6.5, 13.5, 10.5, speed passion 13.5, 5.5, lipotech 13.5. 2 different sanwa radio systems and checked all profiles, blinky, mod and stock. Touring car and offroad 2wd.

Ah, the same day we tested LRP Flow, Hobbywing V3.1 and Fleta 3. No issue with these escs.

I ran mine with mod and stock(same MMR esc). Mod 5.5T and stock 17.5 Blinky. 4 different motors. M11X radio and never had a problem.

...humm, I was just looking at the thread title, I don't have the Pro. It's a Fleta 4 before the Pro version came out. Maybe thats why I have no issues.

http://i175.photobucket.com/albums/w...ps29e6886e.jpg