Go Back  R/C Tech Forums > General Forums > Radio and Electronics
Muchmore fleta pro ESC >

Muchmore fleta pro ESC

Community
Wiki Posts
Search
Like Tree5Likes

Muchmore fleta pro ESC

Thread Tools
 
Search this Thread
 
Old 11-08-2013 | 09:56 AM
  #1  
Thread Starter
Tech Regular
 
Joined: Jun 2013
Posts: 264
Default Muchmore fleta pro ESC

Anyone got one of these new releases? purchased 2 myself and when you have boosted on, turbo is fine but boost with a reedy motor sounds horrible and crunchy at low rpms..its nasty..wonder why that is..certainly isnt anything mechanical on the car, checked all that
kutless likes this.
PurcyP is offline  
Old 11-08-2013 | 03:40 PM
  #2  
Thread Starter
Tech Regular
 
Joined: Jun 2013
Posts: 264
Default

Turns out the crunching noise at low rpm with boost is perfectly normal, its the motor, and can either be worse or better depending on motor, even worse with a corally lol :Z
PurcyP is offline  
Old 11-08-2013 | 05:17 PM
  #3  
JoeyE's Avatar
Tech Master
iTrader: (45)
 
Joined: Oct 2005
Posts: 1,994
Default

I don't have the pro version but I have been running the Fleta 4 esc and Fleta motor for a few months and it works great boosted running mod.

JoeyE is offline  
Old 11-09-2013 | 07:11 AM
  #4  
Thread Starter
Tech Regular
 
Joined: Jun 2013
Posts: 264
Default

Difference between the 4 n pro is rather huge, i think for muchmores first ACTUAL ESC they made its fantastic

buttery smooth
PurcyP is offline  
Old 11-09-2013 | 08:07 AM
  #5  
Geberit's Avatar
Tech Fanatic
 
Joined: May 2009
Posts: 774
Default

Originally Posted by PurcyP
Difference between the 4 n pro is rather huge, i think for muchmores first ACTUAL ESC they made its fantastic

buttery smooth
And what's the difference? Is the software exchangeable? I bought a 4 few months ago and it' already outdated
Geberit is offline  
Old 11-09-2013 | 08:29 AM
  #6  
Thread Starter
Tech Regular
 
Joined: Jun 2013
Posts: 264
Default

No the software is not exchangeable

its software is entirely proprietary to muchmore, no speedpassion flashing or anything, has drive frequency, brake frequency, etc etc
PurcyP is offline  
Old 03-12-2014 | 03:03 AM
  #7  
Rouge711's Avatar
Tech Apprentice
 
Joined: Jan 2010
Posts: 51
From: Italy
Default

In my opinion the new pro is not a good job.
It is nasty, aggressive and the feeling is bad and this is true in all firmwares.
No chance to obtain a good result, i've tried different settings also in drive frequency.
But, it is strange that asian drivers loves it... maybe Mr.Jang preferred them to extend a reasonable firmrware....
I'm very disappointed...
Rouge711 is offline  
Old 03-12-2014 | 03:10 AM
  #8  
dan_vector's Avatar
Tech Elite
iTrader: (27)
 
Joined: Oct 2013
Posts: 4,333
Default

Originally Posted by Rouge711
In my opinion the new pro is not a good job.
It is nasty, aggressive and the feeling is bad and this is true in all firmwares.
No chance to obtain a good result, i've tried different settings also in drive frequency.
But, it is strange that asian drivers loves it... maybe Mr.Jang preferred them to extend a reasonable firmrware....
I'm very disappointed...
Interesting as there were a lot of the fleta pro's at the TITC race in Bangkok and they were absolutely flying! Jang was there....
dan_vector is offline  
Old 03-12-2014 | 03:11 AM
  #9  
dan_vector's Avatar
Tech Elite
iTrader: (27)
 
Joined: Oct 2013
Posts: 4,333
Default

Originally Posted by Geberit
And what's the difference? Is the software exchangeable? I bought a 4 few months ago and it' already outdated
Ha! True but its the nature of the beast. Everything in life is the same these days. A product bought today is out of date tomorrow!
dan_vector is offline  
Old 03-12-2014 | 05:18 AM
  #10  
Thread Starter
Tech Regular
 
Joined: Jun 2013
Posts: 264
Default

Originally Posted by Rouge711
In my opinion the new pro is not a good job.
It is nasty, aggressive and the feeling is bad and this is true in all firmwares.
No chance to obtain a good result, i've tried different settings also in drive frequency.
But, it is strange that asian drivers loves it... maybe Mr.Jang preferred them to extend a reasonable firmrware....
I'm very disappointed...
What motor you using it with, never had any issues with it being aggressive. I for one would of dumped the esc a long time ago if it was nasty and aggressive as i wouldnt be able to drive a car like that at all.
PurcyP is offline  
Old 03-12-2014 | 06:25 AM
  #11  
JoeyE's Avatar
Tech Master
iTrader: (45)
 
Joined: Oct 2005
Posts: 1,994
Default

Originally Posted by Rouge711
In my opinion the new pro is not a good job.
It is nasty, aggressive and the feeling is bad and this is true in all firmwares.
No chance to obtain a good result, i've tried different settings also in drive frequency.
But, it is strange that asian drivers loves it... maybe Mr.Jang preferred them to extend a reasonable firmrware....
I'm very disappointed...

I no problems with mine at all. Maybe because I'm Asian. Are you running mod or stock?
JoeyE is offline  
Old 03-12-2014 | 07:39 AM
  #12  
Tech Master
 
Joined: Jun 2008
Posts: 1,458
From: santa monica / manchester
Default

Originally Posted by Rouge711
In my opinion the new pro is not a good job.
It is nasty, aggressive and the feeling is bad and this is true in all firmwares.
No chance to obtain a good result, i've tried different settings also in drive frequency.
But, it is strange that asian drivers loves it... maybe Mr.Jang preferred them to extend a reasonable firmrware....
I'm very disappointed...
I would check your motor, the big positive with the Fleta is that its very very smooth, have you checked your drive frequency?
Qatmix is offline  
Old 03-12-2014 | 04:08 PM
  #13  
Rouge711's Avatar
Tech Apprentice
 
Joined: Jan 2010
Posts: 51
From: Italy
Default

Don't make misunderstandings, i'm not alone here with this issue and the problem is not Asia or Asians...
Tested with these motors: reedy 13.5, 5.0 4.5, trinity 6.5, 13.5, 10.5, speed passion 13.5, 5.5, lipotech 13.5. 2 different sanwa radio systems and checked all profiles, blinky, mod and stock. Touring car and offroad 2wd.
Rouge711 is offline  
Old 03-12-2014 | 04:10 PM
  #14  
Rouge711's Avatar
Tech Apprentice
 
Joined: Jan 2010
Posts: 51
From: Italy
Default

Ah, the same day we tested LRP Flow, Hobbywing V3.1 and Fleta 3. No issue with these escs.
Rouge711 is offline  
Old 03-12-2014 | 05:31 PM
  #15  
JoeyE's Avatar
Tech Master
iTrader: (45)
 
Joined: Oct 2005
Posts: 1,994
Default

I ran mine with mod and stock(same MMR esc). Mod 5.5T and stock 17.5 Blinky. 4 different motors. M11X radio and never had a problem.

...humm, I was just looking at the thread title, I don't have the Pro. It's a Fleta 4 before the Pro version came out. Maybe thats why I have no issues.

JoeyE is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.