I always keep an extra set of drive shafts TKR5072. Ive broken them in the past with just a dumb look of my face, because i dont have a clue on how i did it. I also keep a bag of Hudy drive pins. Kit calls for 3x12.8. I pick up 3x14. Kit pins last awhile, but they do go bad

how is the wear of the metals? CVD's, outdrives, satellites in the diff?

Pretty good. Will last long.

The only real drivetrain wear I see is on my rear drive shaft pins, maybe 25% gone. I've put on the new angled diff which may help minimize wear.

ok, so ill get front & rear arms, inner hinge pins, spur gear, front shock shafts and maybe cvd's.

the electronics will be tekin gen2 esc and 2050kv motor, and savox 1258 (with the HB arm).

and just two more questions,
is there allot of slop in the steering?
where can i find a setup for bumpy loose track?

bortzilla, the colors you mentioned doesn't mean much to me... what to the front and what for the rear? with what oil?
i want to order it with the kit so if the car doesn't drive well on my track i can change it w/out waiting two weeks for delivery.

got my bce chassis in along with my new batteries. deopped in the 1.3x8 hole pistonsand she is ready for tonight

what lipo is that? 4S?

It is the reedy 14.8v 4600 lipo

The wear on this vehicle is really good. I have around 4 months on my kit now and there is absolutely little to no slop in the steering at all.

As for a set for a bumpy loose track, try the setup attached. I ran it at the Nationals Warmup at LCRC and it worked really well. Sets the car up to be easy to drive and very stable.

I'm having trouble finding a part number.

What's the number for those shinny cone washers that go in the wing? The ones that go between the wing and the flat-heads that hold the wing to the wing mount.

Are these sold separately.

TKR1220

http://www.teknorc.com/shop/tkr1220-...natural-10pcs/

Thanks man

those of you that did the steering mod,
does your m4X6 screws go all the way in or stick out about a mm or so?

can anybody do me a favor
on your buggy, turn it on and take a pic of top of servo for me
mine is alittle off unless I make L turnbuckle longer!
i adjusted sub trim first with everything centered!
driving me nuts! spektrum, hitec 7955tg, tekin rx8 gen2 gen 2 tekin 1900

If you race at, or know of, a great track in Oregon or Washington, please let me know. I'll be traveling up that way to visit during Thankgiving week and would love to stop in on the way up with my wife and both join in some racing if the timing works.