2LikesTekno RC EB48 Thread
05-12-2013 | 10:14 PM
#6391
Tech Addict
iTrader: (52)
Joined: Feb 2010
Posts: 743
From: oregon
A nitro buggy would also be sick...anything from tekno is worth saving for lol
05-13-2013 | 07:53 AM
#6393
Tech Regular
Joined: Dec 2012
Posts: 297
From: Riyadh, Saudi Arabia
05-13-2013 | 08:27 AM
#6394
Ran 5 2s packs through the 4300kv HD today an I'm impressed...in all honesty it has about the same high end with slightly less low end than the 1900kv on 4s with the same gearing...everything did run a little hotter though. Even my 6000mah 65c-130c packs were hitting 125...this was on an outdoor track...the only problem for me is trying to figure out how to control it...anybody have any suggestions on springs for a 6.7 lb buggy...I was going to try the sct410 factory springs but it started raining.
05-13-2013 | 08:55 AM
#6395
Tech Regular
Joined: Aug 2005
Posts: 314
From: St. Helens, OR
Ran 5 2s packs through the 4300kv HD today an I'm impressed...in all honesty it has about the same high end with slightly less low end than the 1900kv on 4s with the same gearing...everything did run a little hotter though. Even my 6000mah 65c-130c packs were hitting 125...this was on an outdoor track...the only problem for me is trying to figure out how to control it...anybody have any suggestions on springs for a 6.7 lb buggy...I was going to try the sct410 factory springs but it started raining.
05-13-2013 | 10:04 AM
#6396
Tekno has already been seen testing a nitro buggy. I'd imagine it will be released next spring. After that they might release a truggy.
05-13-2013 | 11:09 AM
#6397
Tech Addict
iTrader: (52)
Joined: Feb 2010
Posts: 743
From: oregon
Woody, it was the rear end being extremely loose...I've been running the Blair setup but I'm now going to try the door setup...I was thinking softer springs and rear sway bar with thinner fluids...but it was a blast and unless the new t8i's are magical I won't be switching any time soon. FYI Darrell said he's open all next weekend.
05-13-2013 | 11:39 AM
#6398
Tech Regular
Joined: Mar 2013
Posts: 256
05-13-2013 | 12:35 PM
#6399
Tech Regular
Joined: Aug 2005
Posts: 314
From: St. Helens, OR
A little over 14 minutes...probably 3-5 minutes shorter than I was getting with the 5000 mah 4s cells.
Woody, it was the rear end being extremely loose...I've been running the Blair setup but I'm now going to try the door setup...I was thinking softer springs and rear sway bar with thinner fluids...but it was a blast and unless the new t8i's are magical I won't be switching any time soon. FYI Darrell said he's open all next weekend.
Woody, it was the rear end being extremely loose...I've been running the Blair setup but I'm now going to try the door setup...I was thinking softer springs and rear sway bar with thinner fluids...but it was a blast and unless the new t8i's are magical I won't be switching any time soon. FYI Darrell said he's open all next weekend.
The stock rear springs are pretty soft already, may want to try removing any anti-squat and some lighter oil first depending on what you are running now. I'm running 30 in the rear. 1.2x10 pistons(stock drilled out). Think I'm going to try 1.3x8(kyosho) with 30wt next.
05-13-2013 | 12:43 PM
#6400
Tech Addict
iTrader: (52)
Joined: Feb 2010
Posts: 743
From: oregon
Also, for those running door's setup...do you feel that the +2mm front and +1mm rear is a necessity?
Last edited by streetsports; 05-13-2013 at 01:24 PM.
05-13-2013 | 01:59 PM
#6401
Tech Fanatic
Joined: Jan 2003
Posts: 771
From: Pasadena Ca. U.S.A
WOW!!!!!
How cool is it that A Main Hobbies and Tekno RC have teamed up to save everyone some money!
This week you can save 10% on all Tekno Kits and conversions and 20% on all parts. Get all the parts you need at great prices!
While you are on the site check out the awesome price on ProTek Servos and Batteries to outfit your bad ass rides!!!!!!!!
Thanks to AMainhobbies.com and Tekno RC!
See you at the track,
Barry
How cool is it that A Main Hobbies and Tekno RC have teamed up to save everyone some money!
This week you can save 10% on all Tekno Kits and conversions and 20% on all parts. Get all the parts you need at great prices!
While you are on the site check out the awesome price on ProTek Servos and Batteries to outfit your bad ass rides!!!!!!!!
Thanks to AMainhobbies.com and Tekno RC!
See you at the track,
Barry
05-13-2013 | 02:11 PM
#6403
Tech Regular
Joined: Dec 2012
Posts: 297
From: Riyadh, Saudi Arabia
05-13-2013 | 02:23 PM
#6404
05-13-2013 | 02:41 PM
#6405
Tech Regular
Joined: Aug 2005
Posts: 314
From: St. Helens, OR
The only thing I can think of is more stability with a wider stance, but why make the front even wider? I'm sure it has to do with angles and the shocks, but I'm not that smart to understand why.