1 x TLR5164 they were in the buggy section on amain?

EDIT: well i just went and looked and it is the truck ones.... Guess that explains it. Guess I will be running the stock rear springs tomorrow.

Yeah, if you search '22' they both come up.

Ok heading to the track tomorrow after about a two week break. Last time at the track I was having issue's with the rear end being very loose, after landing jumps and trying to get on the throttle I was always sliding out (the rear)...... What are some things I can do to eliminate this, besides the obvious throttle control, tires etc?

cool thanks. First time running shorty packs in the 4.1 so I need to study up.

What shock springs And oil and pistons you running,at sdrc I'm running Losi yellow/red combo with #2 pistons,32.5 30wt Losi oils

32w front 27.5w rear, with avid yellow's front/red rear and I'm currently running MIP Bypass pistons stock setup on those.......

This for OCRC or WC? I've found you can get away with Avid red rear at WC, but not so much at OC. Guys are running about 30 front / 27 rear at OC with soft springs.

No its for coyote hobbies in victorville, I will try softer springs and see.....

Push the bottom spring cup in further, you'll even want to pry the cup a bit to seat better. That should give you more space.

Edit:
Read top first, 22t spring ftw

Dumb question, but what are you guys using to make the holes in the tires?

Leather punch

Leather punch

Just finished a rebuild with almost everything brand new, and figured I had to share this jewelry. I almost don't want to run it, lol.

Also got to put on the new 12mm shocks...DIALED!

How do you get your wires so well hidden and stuck down do nicely?

Looks like you copied Cav's car! Looks good!!