5LikesSC10 4x4 Thread
09-02-2012 | 01:28 PM
Tech Adept
Joined: Apr 2012
Posts: 105
From: Cornwall
The Avid slipper looks the same as the VTS only smaller, how can less surface area be better, what does it do that's better than the VTS?
I've successfully fitted the VTS in my X6 with great results.
http://www.avidrc.com/product/5/acce...ccesories.html
Beaten by the above post!
Still don't see why you would remove a VTS and fit one.
I've successfully fitted the VTS in my X6 with great results.
http://www.avidrc.com/product/5/acce...ccesories.html
Beaten by the above post!
Still don't see why you would remove a VTS and fit one.
09-02-2012 | 01:37 PM
The Avid slipper looks the same as the VTS only smaller, how can less surface area be better, what does it do that's better than the VTS?
I've successfully fitted the VTS in my X6 with great results.
http://www.avidrc.com/product/5/acce...ccesories.html
Beaten by the above post!
Still don't see why you would remove a VTS and fit one.
I've successfully fitted the VTS in my X6 with great results.
http://www.avidrc.com/product/5/acce...ccesories.html
Beaten by the above post!
Still don't see why you would remove a VTS and fit one.
09-02-2012 | 01:45 PM
Just saying.. play nice people no need to bully and gang up.
09-02-2012 | 01:45 PM
Tech Adept
Joined: Apr 2012
Posts: 105
From: Cornwall
Will these fit on the rear of the 4x4 for the 8mm mod?
Lots of different positions.
http://www.avidrc.com/product/5/acce...ccesories.html
Lots of different positions.
http://www.avidrc.com/product/5/acce...ccesories.html
09-02-2012 | 01:48 PM
Good advice here
09-02-2012 | 01:50 PM
Tech Legend
Joined: Aug 2001
Posts: 22,595
From: TRCR Modified Driver
[QUOTE=Matt Trimmings;11164490]He seems to think so and i would just rather have everyone drop it so we can talk about the truck[/QUOTE
Will be endorsing the hell out of the AVID slipper system now ....
Matt , you got a Sc104x4 too ?
Will be endorsing the hell out of the AVID slipper system now ....
Matt , you got a Sc104x4 too ?
09-02-2012 | 01:56 PM
So your previous post about "backward springs, aftermarket slipper pads....." was a lie. Last time I checked Avid was an aftermarket company and their slipper uses their own pads. All I'm really getting at is that you are a moron and ruin this thread for people that are just trying to make their truck better.
No need to call names on here.
If you don't have something say... Don't say anything at all.
This dosnt contribute one bit to the thread
09-02-2012 | 01:58 PM
Tech Fanatic
iTrader: (5)
Joined: Dec 2005
Posts: 866
From: Pacific Northwest
, IMHO, people are entitled to their opinions.
09-02-2012 | 01:58 PM
Will these fit on the rear of the 4x4 for the 8mm mod?
Lots of different positions.
http://www.avidrc.com/product/5/acce...ccesories.html
Lots of different positions.
http://www.avidrc.com/product/5/acce...ccesories.html
its just 8mm on top and i believe 6mm on bottom
09-02-2012 | 02:03 PM
As will I, got one in my B4.1 and SC10. Yeah i got a SC10 4x4 about a month or so ago. Have only ran it once though, the closest track near me runs every other sunday. So the next time i get to run it will be the 16th.