Arrow Racing GTR .21 Engine Thread

Reply Subscribe

Thread Tools

Search this Thread

03-20-2012 | 05:27 AM

#586

stallen50

Tech Master

iTrader: (30)

Joined: May 2010

Posts: 1,209

Quote:

Originally Posted by twitch_1

has any one had leaking from there front bearing or the carby retainer screw????

mine has got 4gals on it now. and i have never had a leak yet. how much fuel does the motor have one it? i know the front bearing can seep fuel if ran really rich. if the carb retainer screw is leaking put some rv silicone on it and it should take care of that. may want to check and make sure the screw isn't loose.

03-20-2012 | 02:56 PM

#587

Rsickles

Tech Master

iTrader: (21)

Joined: Aug 2010

Posts: 1,337

From: Southeast USA

Quote:

Originally Posted by twitch_1

has any one had leaking from there front bearing or the carby retainer screw????

Does your carb retainer have any o-rings on it? If I'm not mistaken, there were two versions of the carb retainer.

Quote:

Originally Posted by Jaz240

Those prices cannot be with any Mods. Thats street price for the stock P/S/R

The seller hasn't responded to my question, so I think there's no mods other than being a Arrow set (which changes the rod design).... but even if there were mods, I wouldn't chance it. What credentials does that guy have?

Last edited by Rsickles; 03-20-2012 at 03:01 PM. Reason: I should finish my sentences...

03-20-2012 | 03:20 PM

#588

Jaz240

Tech Lord

iTrader: (52)

Joined: Aug 2008

Posts: 12,494

From: Dwindle city

Quote:

Originally Posted by losi_racer

James , has the carb rings Been fixed on this motor

Yes the carb has been completely updated.

03-20-2012 | 05:48 PM

#589

James khoo

Tech Elite

iTrader: (15)

Joined: Jun 2006

Posts: 2,826

From: Malaysia

Quote:

Originally Posted by razzie

2 gallons..?... still have such a long way to go ah...

No wonder theres still so much mechanical pinch after half a gallon..

Do it slowly,the engine will perform!

03-20-2012 | 06:33 PM

#590

rossham46

Tech Regular

iTrader: (6)

Joined: Feb 2009

Posts: 458

Quote:

Originally Posted by razzie

2 gallons..?... still have such a long way to go ah...

No wonder theres still so much mechanical pinch after half a gallon..

Dun wori ah. Still got enuf time for mnl 2.

03-20-2012 | 07:01 PM

#591

twitch_1

Tech Addict

Joined: Feb 2008

Posts: 712

Quote:

Originally Posted by stallen50

My motor has about 2-3 litres on it and i did find the screw a little lose so hopefuly that was the problem but one thing it held it's tune all day and the seeping could be from that as there was minimal dirt on the bearing only on the bottom...

[QUOTE=Rsickles;10493832]Does your carb retainer have any o-rings on it? If I'm not mistaken, there were two versions of the carb retainer.

i ment the screw that holds the carby in...

03-20-2012 | 08:15 PM

#592

Rsickles

Tech Master

iTrader: (21)

Joined: Aug 2010

Posts: 1,337

From: Southeast USA

Quote:

Originally Posted by twitch_1

i ment the screw that holds the carby in...

You mean this? http://www.vp-pro-usa.com/engines/ar...category_id=86

03-20-2012 | 09:17 PM

#593

James khoo

Tech Elite

iTrader: (15)

Joined: Jun 2006

Posts: 2,826

From: Malaysia

Quote:

Originally Posted by rossham46

Dun wori ah. Still got enuf time for mnl 2.

Ya,you're right.plenty of time for break in new engine.less then a month to race.

03-20-2012 | 11:14 PM

#594

razzie

Tech Regular

iTrader: (1)

Joined: Oct 2005

Posts: 384

Quote:

Originally Posted by James khoo

Ya,you're right.plenty of time for break in new engine.less then a month to race.

Have heard only the good things about the engine... Then must get another 1 from Max Racing after MNL 2... But this time... The pre -run version ah..

03-21-2012 | 12:38 AM

#595

pcage

Tech Apprentice

Joined: Jan 2012

Posts: 84

Can Arrow parts fit into a OS XZB ? My friend is impressed. And like to buy Arrow parts for his OS Engine. The conrod, PS etc. Anyone ?

03-21-2012 | 03:37 AM

#596

twitch_1

Tech Addict

Joined: Feb 2008

Posts: 712

Quote:

Originally Posted by Rsickles

You mean this? http://www.vp-pro-usa.com/engines/ar...category_id=86

Yep thats the one but mines silver....

might even change the o-rings on it and see what happens...

Last edited by twitch_1; 03-21-2012 at 04:00 AM.

03-21-2012 | 05:13 AM

#597

rossham46

Tech Regular

iTrader: (6)

Joined: Feb 2009

Posts: 458

Quote:

Originally Posted by razzie

Have heard only the good things about the engine... Then must get another 1 from Max Racing after MNL 2... But this time... The pre -run version ah..

Dun be lazy ah. Breaking in the arrow is a good learning experience. Learn new things. Southern alley is also only a short drive away. Or u can ask david aw do for u if he has the time lol.