Community
Wiki Posts
Search
Like Tree5Likes

SC10 4x4 Thread

Thread Tools
 
Search this Thread
 
Old 03-17-2012 | 12:21 PM
  #19396  
vito's Avatar
Tech Elite
 
Joined: Nov 2011
Posts: 3,936
From: roseburg or
Default

some one know win the up grade kit will be out and eta ty
vito is offline  
Old 03-17-2012 | 12:59 PM
  #19397  
heavyjeffd's Avatar
Tech Elite
iTrader: (15)
 
Joined: Mar 2010
Posts: 2,805
Default

Originally Posted by jsamarin
Make sure your inner center belt tunnel screws arent too tight. if they are, it will not "telescope" under hard impacts, causing it to bend outwards. Ive done it before, and even with the chassis brace, the truck still has enough flex for this to happen.

Typically i bottom my screws out, then unthread them one complete turn.

Hope that helps
Originally Posted by Mizchief
Check to make sure your motor plate is in the groove. That was my issue when I had that problem
Originally Posted by toyoter91
I had this issue on my truck and I think the new owner of it said it had something to do with the motor plate not being straight as he recently fixed the issue.
Originally Posted by PastaBoyNY
Jeff, check all of the fasteners that hold the three pieces of the chassis together. Also, check the ends of your brace to see if it is broken. Hope that helps...


Sal
Thanks guys, I'll pull it apart and take a look at all of this. appreciate the help.
heavyjeffd is offline  
Old 03-17-2012 | 03:46 PM
  #19398  
steelers82's Avatar
Tech Adept
iTrader: (8)
 
Joined: Jul 2011
Posts: 218
From: upland, ca.
Smile

hey everyone,very nice fully upgraded sc10 4x4 for sale with all electronics and saddle pack batteries,and lots of extras,check it out in the for sale/trade forum
steelers82 is offline  
Old 03-17-2012 | 05:37 PM
  #19399  
Oasis's Avatar
Tech Lord
iTrader: (38)
 
Joined: Dec 2002
Posts: 11,184
From: * Sin Cal *
Default

For such an "awesome" SC people are sure sellin a lot of them..
Oasis is offline  
Old 03-17-2012 | 05:51 PM
  #19400  
Mizchief's Avatar
Tech Elite
 
Joined: Oct 2011
Posts: 2,069
Default

Originally Posted by Oasis
For such an "awesome" SC people are sure sellin a lot of them..
Been thinking about selling mine. Not because I don't like it or because I want a Losi, but it's hard to find races and I'm thinking about going ebuggy instead.
Mizchief is offline  
Old 03-17-2012 | 06:30 PM
  #19401  
Tech Rookie
 
Joined: Jan 2012
Posts: 19
Default

So, today, I finally found out what it is like to be "Losi'd", lol. Man, are those things tanks but at least no damage and only a bit of a wait for marshalling to happen as it was only practise day.

I tried the blue front springs on the rear of mine and added 10 turns of the adjusters. It made my setup way too stiff as the rear inside lifted at the slightest provocation, so I went the opposite direction and put the greens on with one less turn of adjustment. It was a noticable improvement over the blues but I need the whites put in before the first round tomorrow.

I can hardly wait for the FT coming my way so I can get it dialed in for the next indoor series. All the adjustments and metal upgrades done to my RTR will be done to the FT and once the FT is up and running, that is the time I will work with the ball diff in the original truck. That way, I can see exactly what handling improvements will be there with one truck compared directly to the other. A carpet may or may not be the best place to use the ball diff. Would it? Take care.

Don
Keyrigger is offline  
Old 03-17-2012 | 06:49 PM
  #19402  
CoyoteSlash's Avatar
iTrader: (8)
 
Joined: May 2011
Posts: 1,311
From: Portland, OR
Default

Originally Posted by vito
some one know win the up grade kit will be out and eta ty
vvvvv
Originally Posted by ilanstylz
according to towerhobbies the FT parts are due in Mid March......
CoyoteSlash is offline  
Old 03-17-2012 | 08:50 PM
  #19403  
Tech Apprentice
iTrader: (1)
 
Joined: Oct 2011
Posts: 51
Default

Sorry Coyote but you are a dub.
Shins is offline  
Old 03-17-2012 | 09:05 PM
  #19404  
ilanstylz's Avatar
Tech Elite
iTrader: (142)
 
Joined: Apr 2011
Posts: 4,615
From: SOCAL
Default

Originally Posted by Shins
Sorry Coyote but you are a dub.
He's a 20 dollar bill? A rim? A magazine?
ilanstylz is offline  
Old 03-17-2012 | 09:33 PM
  #19405  
CraigMBA's Avatar
Tech Elite
iTrader: (22)
 
Joined: Mar 2003
Posts: 2,838
From: Valley of the Dirt, CA
Default

Originally Posted by ilanstylz
He's a 20 dollar bill? A rim? A magazine?
I don't think he ment the nickname for white trash. Forced to guess, I'd be #8.

http://www.urbandictionary.com/defin...erm=dub&page=2

Coyote can't win, newbie users can't bother to use search. Meh.
CraigMBA is offline  
Old 03-17-2012 | 10:01 PM
  #19406  
heavyjeffd's Avatar
Tech Elite
iTrader: (15)
 
Joined: Mar 2010
Posts: 2,805
Default

It was the motor mount out of the slot.

I feel like an idiot.

Thanks guys.
heavyjeffd is offline  
Old 03-17-2012 | 10:08 PM
  #19407  
CoyoteSlash's Avatar
iTrader: (8)
 
Joined: May 2011
Posts: 1,311
From: Portland, OR
Default


I... am actually a little dumbfounded.

I quoted the answer that was posted 4 posts before his. I also have PM'd vito trying to help him get set up...

I really can't win.
CoyoteSlash is offline  
Old 03-18-2012 | 12:54 AM
  #19408  
JEFFs SC10's Avatar
Tech Elite
iTrader: (15)
 
Joined: Sep 2010
Posts: 4,044
From: Orlandooooo, Fl
Default

Originally Posted by rickybobbyxxx
Epic track day!! Truck was perfect
what's your setup? you can pm me if you want
JEFFs SC10 is offline  
Old 03-18-2012 | 05:07 AM
  #19409  
Tech Apprentice
iTrader: (1)
 
Joined: Oct 2011
Posts: 51
Default

Alright, I take it back. Thought you were just going out of your way to be a d*ck. My fault
Shins is offline  
Old 03-18-2012 | 06:57 AM
  #19410  
Farmer_John's Avatar
Tech Addict
iTrader: (3)
 
Joined: Mar 2009
Posts: 656
Default

Originally Posted by CraigMBA
I don't think he ment the nickname for white trash. Forced to guess, I'd be #8.

http://www.urbandictionary.com/defin...erm=dub&page=2

Coyote can't win, newbie users can't bother to use search. Meh.
Coyote would be a straight up 9.

Look, the search function works only if the searcher knows exactly what or who they're looking for.

With all the talk, side talk, glad handing and bitch festing, how can anyone find anything without asking a question?

Stop turning people off by not wanting to answer a question by answering it in a non helpful way.
Farmer_John is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.