Dasmopar

http://www.tqrcracing.com/shop/produ...on_id=&pg_no=1

mattwoodcraft

iTrader: (10)

the kimorough spurs work a treat and you can put 12 diff balls in them and the diff works very well heaps better. im using a 2.5 fdr 88 spur 35 pinion with a 17.5 motor can drive around for 30 minuts and the motor is warm.

LordAnubis

iTrader: (19)

You in town this weekend matt? If you're free we should go to the test track on Saturday... im racing whiteman park on sunday.

fritzzz

Going to bite the bullet and order a F104 Vodafone McLaren Mercedes MP4-24

What else do people recommend I order?

58475 F104 Vodafone McLaren Mercedes MP4-24
http://www.stellamodels.com.hk/produ...oducts_id=5218

54215 Spur Gear Adapter (F104)
http://www.stellamodels.com.hk/produ...oducts_id=4594

54158 F104 Aluminum Diff Housing Set
http://www.stellamodels.com.hk/produ...oducts_id=4035

Batteries - do I need a rounded LiPo or will square fit?

I need a small ESC to go with the stock can?

Thanks for your help, can't wait to get onto it!

nrtv20

iTrader: (9)

What car has the better aerodynamics package? The Ferrari or McLaren?

rcdave1

iTrader: (14)

If you are in the US take a look at tqrcracing.com they have 104's and parts in stock at good prices and fast shipping

Dasmopar

Rounded lipo fits better but both can be made to fit.

aarcobra

iTrader: (12)

Deuce-Are these "Toledo F1 legal"?

Dasmopar

Yes it is but I think we are all using the tamiya gears so far.

SquirrelCZE

Hello

i've got interesting problems, my suspension (two "classic" dampers, with no friction damper) works very well with my Tamya F104GT.... but i've got problems with steering.

I have on my controller EPA for steering: L: 30% R: 75%. And still everytime i turned left on the track it was too much, but on the right it was good..... i think this is not normal, do you have any suggestions? :-( P.S: i have 103GT front axle

robk

iTrader: (22)

oil shock...

fritzzz

Thanks but I am in Australia - will check out their shipping but things tend to be cheaper from Hong Kong

fritzzz

Something like this one?

http://www.stellamodels.com.hk/produ...oducts_id=4176

mattwoodcraft

iTrader: (10)

thats the one

al dente

hey guys, i have an f104x1, love car but am having a problem. when i try to get on throttle coming out of a turn, the car diffs out..... i've tried tightening the diff to various different degrees, including all the way locked down, where the car just loops out on throttle. the car seems to be staying flat in the corners, and does not lift the tire. but it seems that just the slightest bit of traction loss to one side causes the diff to spin.

any thoughts or ideas?