|
Originally Posted by Ronisonce
(Post 14186596)
Gave in, ordered one..
You won't regret it, awesome transmitter |
Has anyone replaced the screen on your radio? I have a couple of scratches on mine and I would like to replace it and then fit a protector.
|
Disregard last; found what I was looking for combing through the thread for some time.
|
Program the Tx or Esc?
I've new to this type of format, so please excuse me if I have managed to post this in the wrong place.
I have purchased a 4PX Tx and the Tekin DX8 (with Hotwire). I have zero experience with either so I have no bias on a direction on which way to go. From my reading of both the Tekin website and the PX manual there appears to be overlap on some programable functions such as braking. Is it better to program the radio or the Esc with the majority of functions? It would seem to me that letting as many of the functions reside in the transmitter would allow quick changes without using the Hotwire vs. letting the radio be "dumb" and programming the Esc? |
Originally Posted by Kamewadave
(Post 14188764)
I've new to this type of format, so please excuse me if I have managed to post this in the wrong place.
I have purchased a 4PX Tx and the Tekin DX8 (with Hotwire). I have zero experience with either so I have no bias on a direction on which way to go. From my reading of both the Tekin website and the PX manual there appears to be overlap on some programable functions such as braking. Is it better to program the radio or the Esc with the majority of functions? It would seem to me that letting as many of the functions reside in the transmitter would allow quick changes without using the Hotwire vs. letting the radio be "dumb" and programming the Esc? |
Thank you. I will give it a try.
|
I am trying to update my radio, I have the file downloaded and on my sd card in the radio, I hold end down while turning the radio on. It just turns on like normal
|
Try a smaller capacity micro SD Card
ensure the card is formatted FAT32 ensure the firmware is unzipped correctly in root of the micro SD card |
Just picked one up due to a huge sale at tower. They aren't kidding when they say not to use AA batteries. The set I used to set it up lasted all of 5 min. Hope the lipo comes soon.
On the receiver. Where should I plug the transponder into? |
Originally Posted by Hauptmann6
(Post 14195665)
Just picked one up due to a huge sale at tower. They aren't kidding when they say not to use AA batteries. The set I used to set it up lasted all of 5 min. Hope the lipo comes soon.
On the receiver. Where should I plug the transponder into? |
Originally Posted by disaster999
(Post 14195693)
There's a setting where you can tell the radio if you are using lipo or AA battery. Make sure you set your radio right or you will always have low battery warning with AA.
|
Originally Posted by Hauptmann6
(Post 14195665)
Just picked one up due to a huge sale at tower. They aren't kidding when they say not to use AA batteries. The set I used to set it up lasted all of 5 min. Hope the lipo comes soon.
On the receiver. Where should I plug the transponder into? http://www.amainhobbies.com/rc-cars-...100-2s/p165091 |
http://www.hobbyking.com/hobbyking/s...14SG_4PK_.html
Been using these in my 4px and my sons 4pls. They last well over 2 race days and are less than 1/2 of the price of the protek. $16 |
1 Attachment(s)
4pxR
|
Originally Posted by Danny Teh
(Post 14196458)
4pxR
|
| All times are GMT -7. It is currently 11:10 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.