R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   New LRP Flow Esc (https://www.rctech.net/forum/radio-electronics/645867-new-lrp-flow-esc.html)

Troy Carter 07-17-2013 09:17 PM


Originally Posted by mhavlena (Post 12357722)
OK, you got me there,....I was way over-geared, at least, that's what people are telling me....FDR = 8.0

Customer support thought that I should send it in anyway, even though I was over-geared, thus I sent it in...;(

I think that I jumped the gun on this one...

8.0 doesn't sound that crazy far off to me. On the older SXX with more limited boost settings and a big track I would gear 6.9 to 7.25 without issues. 8.3-8.5 may be better but with no boost/turbo I wouldn't think 8.0 would shut things down.

jag88 07-18-2013 05:27 AM

Has anybody updated their ESC using Vista ?
If so, were there any issues ?

Thanks.

pmc 07-18-2013 02:20 PM

Hello

Anyone have tested this Esc LRP Flow with Thunder power 4,5T modified motor??

which is her performance in the track ??

Thanks in advance.
Best regards:
Pedro Silva

Kwikvdub 07-19-2013 01:34 PM

Hello, Does anyone know where I can get a Factory Fan with plug and screws??..... I bought a used FLOW Works but did not come with a cooling fan...... If someone can point me in the right direction..... I think its a 30x30mm..... Thanks!:nod:

Smartypants 07-19-2013 01:45 PM


Originally Posted by jag88 (Post 12359529)
Has anybody updated their ESC using Vista ?
If so, were there any issues ?

Thanks.

No issues using vista

metalnut 07-19-2013 06:54 PM


Originally Posted by Kwikvdub (Post 12363765)
Hello, Does anyone know where I can get a Factory Fan with plug and screws??..... I bought a used FLOW Works but did not come with a cooling fan...... If someone can point me in the right direction..... I think its a 30x30mm..... Thanks!:nod:

I e-mailed AE about this a while go, last I heard the LRP fans weren't available (30x30mm is right). So, I just went with an aftermarket fan that I plug into my RX.

Kwikvdub 07-19-2013 09:49 PM


Originally Posted by metalnut (Post 12364566)
I e-mailed AE about this a while go, last I heard the LRP fans weren't available (30x30mm is right). So, I just want with an aftermarket fan that I plug into my RX.

Thanks!..... Looks like I'm going that way too....

IVAN RM 07-21-2013 02:25 PM

2 LRP Flow for sale. Check here http://www.rctech.net/forum/r-c-item...ealed-box.html

Cridd 07-24-2013 08:36 PM

LRP and AE going there separate ways.

http://www.redrc.net/

ChadB. 07-25-2013 09:15 AM

I need to send in my Flow because of a possible failure to the board. My question is it going to be ok to still send it in with the split in progress? I am fearfull that my speedo will get lost in the process. If an LRP associate can chime in, it would be greatly appreciated.

Thank you.

Troy Carter 07-25-2013 09:50 AM


Originally Posted by ChadB. (Post 12381918)
I need to send in my Flow because of a possible failure to the board. My question is it going to be ok to still send it in with the split in progress? I am fearfull that my speedo will get lost in the process. If an LRP associate can chime in, it would be greatly appreciated.

Thank you.

I have not seen an LRP rep here but AE did just respond to a question of mine via email and I'm sure would be willing to still help, if you ask.

Skillz_B 07-25-2013 10:38 AM

I just sent one in last week to AE, I would call and see if they will still repair it. Since the split hasnt finalized, and LRP America isnt up and running yet, I would assme AE will take care of you.

nolo148 07-25-2013 02:01 PM

Anybody got any boosted settings with a 10.5? On a smaller outdoor parking lot track. A starting point would be awesome.

Cridd 07-25-2013 07:03 PM

I am sure they will take them up until August 30th and finish out after that.

Gerrie 08-12-2013 07:55 AM

Hi guys , got my flow with X20 . Has anyone got a good starting point for 17.5 boosted. It is a medium track with a 20-25m straight. Thanks


All times are GMT -7. It is currently 06:32 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.